Bedienungsanleitung Ecm Synchronika (Seite 25 von 33) (Deutsch, Englisch)

654249

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Bedienungsanleitung / User Manual SYNCHRONIKA

ENGLISH

Please consider that the procedure described in the steps above is the same if the steam/ hot water boiler is

deactivated: also in this case the steam/ hot water boiler will be filled and the PID display indicates the temperature

in the steam/ hot water boiler. However, the orange control lamp remains off and the steam/ hot water boiler will

not be heated.

Before preparing the first coffee, please clean the machine by extracting about 2L of hot water from

the brew group and the hot water wand.

Machine in use with a direct water connection (steam/ hot water boiler activated)

1 Please make sure that the valve at the bottom panel of the machine and the switch behind the drip tray are in the

correct position (see chapter 4.3, image 1 and 2).

2 Make certain that the pump pressure gauge indicates enough pressure.

3 Plug the machine into an electrical outlet. Place the brew lever into the upper position.

4 Turn the machine on by placing the metal switch in the upper position. The green control lamp and the PID

display will come on and a pump noise will be heard. The coffee boiler and the steam/ hot water boiler are now

filled with water simultaneously.

As soon as water is released through the brew group, position the brew lever back downward. If there is still a

pump noise, the filling of the steam/ hot water boiler is still being completed.

5 As soon as both boilers are filled with water, the pump will become quiet. The PID display and the orange control

lamp will illuminate. Both boilers are now being heated in succession whereby the coffee boiler has priority.

6 The PID display will show the current temperatures of both boilers alternately (see chapter 3.3).

The machine is ready for coffee preparation as soon as the PID display indicates the pre-set nominal temperature

of 93°C (factory setting). The machine is ready for steam/ hot water dispension as soon as the PID display

indicates the pre-set nominal temperature of 123°C (factory setting) or the boiler pressure gauge indicates a

value of about 1.0-1.5 bars.

7 Manual boiler venting is not necessary because the Synchronika contains a professional anti-vacuum valve, which

automatically vents the boiler during the heat-up phase. This venting process is done by way of the brew group,

directly into the drip tray. Caution, steam forms!

8 The machine is now ready for use.

Please consider that the procedure described in the steps above is the same if the steam/ hot water boiler is

deactivated: also in this case the steam/ hot water boiler will be filled and the PID display indicates the temperature

in the steam/ hot water boiler. However, the orange control lamp remains off and the steam/ hot water boiler will

not be heated.

The SYNCHRONIKA has a fuse to prevent the machine from overfilling.

It is possible that the machine does not heat up when using it for the first time or when dispensing

large quantities of water through the hot water valve. In this case, please switch the machine off and

on again.

Filter holder, drip tray, drip grid and water tank are not suitable for the dish washer.

6 USE OF THE MACHINE

6.1 Preparation of the machine

The switched off machine is to be placed into operation as follows:

Water tank machine or machine in use with water tank

1 Fill the water tank.

2 Make sure there is enough water in the tank.

3 Now turn the machine on (the metal switch in the upper position and the left switch behind the drip tray in

position ‘0’).

To use the steam function, press the right switch behind the drip tray in position ‘I’ (image 3, page 23).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ecm Synchronika Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ecm Synchronika

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info