Bedienungsanleitung Eden World Tour Pro Series (Seite 7 von 51) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

706110

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

HI FIDELITY FOR LOW FREQUENCY

| 13

EDEN

| WTP SERIES |

WTP900

REAR PANEL FEATURES - 9

12 | HI FIDELITY FOR LOW FREQUENCY

EDEN

| WTP SERIES |

REAR PANEL FEATURES - 8

OFF: When the indicator is off you are not clipping the power stage of the amplier.

AMBER: If the indicator illuminates amber this means you have clipped the input stage of the amplier briey but not for a

prolonged period of time. If the indicator operates only in the amber stage you are getting the maximum from the input stage of

the amplier without causing undesirable clipping to your sound.

RED: When the indicator illuminates red it will stay on for at least 1 second or continually to indicate clipping of the power

amplier. If the indicator ashes red this means that you are using the amplier outside of its correct limits and the amplier is

overheating this will cause the amplier to go into a safe mode reducing the chance of long term damage to the amplier by

increasing the cooling of the unit and lowering the output volume of the amplier.

26. Master Volume: This adjusts the output volume of the amplier. Use this control in conjunction with the output clip indicators (on

powered units only) to achieve the best performance from your amplier.

27. Illuminated Logo: Logo illuminates when amplier is switched on.

28. OFF / ON switch: Turn your amplier off or on using this switch.

29. Cooling Vent: Provides ventilation for the units cooling system. NEVER OBSTRUCT OR MODIFY THIS OR ANY OTHER VENT ON

YOUR UNIT.

REAR PANEL FEATURES

(For WTP900, WTP600 and WTPre)

Features will be the same for each model except where the functionality is changed due to the absence of one or more power amplifiers

in the product.

Depending on the model you own your World Tour Pro series product may be fitted with up to 3 internal fans. When turning the unit on

these fans will briefly run up and then switch off again. The Fans in World Tour Pro products are only designed to activate when the unit

becomes hot. It is normal for the fans to remain off if not required by the amplifier

Cooling Vent: Provides ventilation for the units cooling system. NEVER OBSTRUCT OR MODIFY THIS OR ANY OTHER VENT ON

YOUR UNIT.

Power Input: Plug your unit in here. Please ensure your unit is of the correct voltage for your region and that you only use an Eden

supplied power cable.

World Tour Pro 900 Rear Panel Features

SPEAKER OUTPUTS: The Eden Illuminated Output System used on World Tour Pro ampliers has been designed by Eden to more

easily allow players to make the right choices with their rig selection. Because the sockets are illuminated, it allows you to simply

select the mode that suits your cabinets ensuring you get the best performance with the equipment you own.

Each mode selected switches between bridge / bi-amp and represents the correct cabinet impedance that should be used with the

associated socket, Green indicates 4ohm compatibility, Amber indicates 8ohm compatibility and red indicates that the socket should

not be used.

Bridge Series: In addition to standard modes the World Tour Pro 900 is able to run in Bridge Series Mode. When engaged the

amplier can be used in bridged mode with 2 - 4ohm cabinets.

1. Speaker Output 1: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead here.

2. Speaker Output 2: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead here.

3. Amp Left Speaker 2 Output: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead

here.

4. Amp Right Speaker 2 Output: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead

here.

5. Output Left: Take your left signal output (post loop) to external equipment here.

6. Output Right: Take your right signal output (post loop) to external equipment here.

7. Aux Input: Connect Auxiliary input signal from your MP3 player or other device using 3.5mm jack cable here.

8. Headphones: Connect your headphones using this 3.5mm output (the headphone volume is controlled by the Master Volume control on

the amplier front panel).

9. Stereo Loop Return L: Return your left effect chain signal here.

10. Stereo Loop Return R: Return your right effect chain signal here.

11. Balance Control: Use this control to balance the level between the two ampliers.

12. Stereo Loop Send L: Send your left effect chain signal out from here.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eden World Tour Pro Series Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info