Bedienungsanleitung Edilkamin Mito Idro (Seite 21 von 32) (Englisch)

810921

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH

SETTING: CLOCK AND WEEKLY PRO-

GRAMMING

Press the key SET for 2”: this takes you into the program-

ming menu and the display will show the wording “TS”.

Press the keys

until the wording “Prog” ap-

pears, then press SET.

By pressing the keys

the following settings can

be selected:

• Pr OF: This enables or completely disables the use of

the timer.

To activate the timer, press the SET key and then choose

“On”

with the keys

, set “OFF” to deactivate it, confirm

the setting with the SET key, then press the ESC key to

leave the programme.

• Set: this lets you set the current time and day.

To set the current time, select the wording “SET” on the

display, confirm the selection with the SET key, set the cur-

rent time; every

time the key is pressed the time will increase by 15’,

and it

will decrease by 1’ every time the key

is pres

sed

Confirm the setting with the SET key, set the current day

the week by means of the keys

(e.g. Monday=Day

1), confirm the programming with the SET key, after en-

tering the day/time, the display will show the wording

‘Prog’, press SET to continue programming for Pr1/Pr2/

Pr3 or press ‘ESC’ to leave the programming.

• Pr 1: This is programme no. 1; this is for setting the

1st ignition timetable, the 1st shut-off timetable and the

days on which to apply the timetable Pr 1.

To set the Pr 1 timetable, with the keys

select

“Pr 1”, confirm the selection with the SET key the dis-

play will briefly

show “On P1”, with the keys

set the ignition

time of the Pr 1 timetable, confirm with the SET key, the

display will

briefly show “OFF P1”, then with the keys

set

the shut-off time of the Pr 1 timetable, confirm with the

SET key.

Continue to assign the same timetable to the various

days of the week, with the SET key the days will scroll

from day 1 to day 7,

where day 1 is Monday and day 7 is Sunday, with the

keys

the programme Pr 1 is activated on the days se-

lected on the display (e.g. On d1=active or Of d1 =not

active).

After completing the programming, the display will show

the wording ‘Prog’, to continue programming Pr 2/Pr

3 press ‘set’ and repeat the above described proce-

dure, or press ‘ESC’ to leave the programming.

- Example of programming

Pr 1:

On 07:00 / OF 09:00: red=active green=not active

Day 1 Day 2 Day 3 Day 4 Day 5 Day 6 Day 7

On On On On On Off Off

Pr 2:

This lets you set a second timetable; for the programming procedure, follow the same instructions as for Pr 1.

Example of Pr 2 programming On 17:00 / OF 23:00: red=active green=not active

Day 1 Day 2 Day 3 Day 4 Day 5 Day 6 Day 7

On On On On On Off Off

Pr 3:

This lets you set a third timetable; for the programming procedure, follow the same instructions as for Pr 1 and Pr 2.

Example of Pr 3 programming On 09:00 / OF 22:00: red=active green=not active

Day 1 Day 2 Day 3 Day 4 Day 5 Day 6 Day 7

Off Off Off Off Off On On

INTRODUCTION ABOUT USE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Mito Idro Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Edilkamin Mito Idro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info