Bedienungsanleitung Edilkamin Story (Seite 40 von 209) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

810770

Zoom out

Zoom in

Vorherige Seite

1/209

Nächste Seite

- 40 -

ENGLISH

INSTRUCTIONS FOR USE

Conﬁ rm by pressing MENU and the remaining quantity

of pellets will be displayed + that being loaded (default is 15

and can be changed using the +/- keys). Should the hopper run

out of pellets, the stove will block and ‘Stop/Flame’ will appear

(see page 35).

Note: Every now and again remember to reset the “pellet

reserve warning” for it to function in a more reliable

manner. For any clariﬁ cation please contact the authorised

DEALER who performed the ﬁ rst 1st ignition.

This provides a reference indicator. Greater precision is

obtained by regularly zeroing the system before ﬁ lling it again.

Edilkamin does not accept any responsibility for differences

from what is indicated (which may be due to external factors).

Environmental temperature adjustment

this comfortable and simple adjustment feature, as standard in

this line of products, allows you to manage the stove power

based on the environmental temperature.

After activating the “Clima Comfort” function from the para-

meters menu (ask the technical assistance centre - TAC), we

can use this function to switch off the stove when it reaches the

set temperature. This function is combined with the AUTO-

MATIC stove setting. MANUAL mode operation will in any

case remain unchanged.

After the Comfort Clima function has been enabled by the

TAC, you can activate/deactivate it from the user menu. Press

the SET key, look for the “Comfort Clima” menu with the

+/- keys, select it with the SET key, set ON/OFF with the +/ -

buttons, save the desired setting and exit using the 0/1 button.

Operation details Comfort Clima ON

when set on AUTOMATIC, the stove modulates its power

by following the temperature set by the user. On reaching

environmental temperature, the stove switches off and then

switches on again independently when the temperature drops.

Temperature selection

In “Comfort Clima” mode, by pressing the +/ - buttons on the

synoptic panel or on the remote control, you can set the display

to the desired environmental temperature. So we will have the

following situations:

-At environmental temperatures below the setting, the stove

switches on independently, modulating the power automatical-

ly.

-With environmental temperature reached (+2°C) the stove

switches to stand-by. The environmental temperature is sent

from the remote control; the remote control transmitter must

be visually aligned with the receiver of the synoptic panel.

If the remote control is incorrectly positioned, it cannot send

its recorded temperature. The stove therefore independently

switches to use of its on-board temperature sensor and conti-

nues thus until the connection with the remote is restored

Temperature adjustment with external thermostat

another temperature control system is available as an alterna-

tive to the remote control. You can in fact connect the thermo-

stat serial port to your home thermostat or any (clean output

contact) easily available one.

The stove will automatically recognise the connection with the

serial port of the thermostat under the following conditions:

With environmental temperature lower than the thermostat

setting (contact closed), the stove modulates power normally to

follow the set temperature

-With environmental temperature reached by the thermostat

(contact open), the stove switches to stand-by mode.

Conﬁ guration

Temperature

provided by the

remote control

Temperature

provided by

external

environmental

thermostat

No adjustment

(factory setting)

"Comfort

Clima"

parameter

ON ON ON

“SONDA IR”

parameter ON OFF ON

Connection to

serial port

no connection

Yes

with blue

serial cable

no connection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Story Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info