Bedienungsanleitung Elro HA68S (Seite 28 von 34) (Englisch)

536725

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

-39--26-

purpose, the Admin. password won’t be displayed, only User password will be

shown on the display.

To change the setting press .

Enter the new 4 digit Password and then

Press to save and exit, or

Press to exit without saving.

USER NAME

This enables each user’s name to be shown in the LCD screen once the system

is armed/disarmed by the particular user. The maximum memorized capacity for

each user name is 15 digits.

Scroll through the menu until ‘:2 Name’ is displayed.

To change the setting press .

Enter the user name by using the control panel’s keypad.

Press to save and exit, or

Press to exit without saving.

REMOTE SYSTEM CONTROL

This feature, if enabled, allows the system to be remotely controlled via the

telephone.

Scroll through the menu until ‘:3 TEL Remote’ is displayed.

To change the setting press

Press to enable the remote system control, or

Press to disable the remote system control.

RECORD USER MESSAGE

This enables each user to record a short 4s message for use with the latchkey

facility. e.g. “system disarmed by user-1”.

Scroll through the menu until ‘:4 Record User Message’ is displayed.

To record a new message press .

Press to start the voice recorder, (max. duration: 4s) Once completed the

recording will automatically be played back, or

Press to exit without changing.

Note: After recording the message, press to stop the recorder and cancel

any remaining message time.

To change the setting press .

Press to enable Auto Report function, or

Press to disable Auto Report function.

ZONE STATUS

This controls whether the detector is implemented on the zone.

Default setting: ON

Scroll through the menu until ‘:10 Zone status’ is displayed. The current

setting will also be displayed.

To change the setting press .

Press to enable the implementation of Detector on the zone, or

Press to disable the implementation of Detector on the zone.

ZONE RESET

This feature, if enabled, allows the deletion of the detector on the zone.

Scroll through the menu until ‘:11 Zone Reset’ is displayed.

Press to delete the setting of Detector on the zone, or

Press to keep the latest setting without changing.

ZONE SIREN

This decides whether all of the sirens connected to the Control Panel will sound

or be silent when the system is triggered.

Default setting: ON

Scroll through the menu until ‘:12 Zone Siren’ is displayed. The current setting

will also be displayed.

To change the setting press .

Press to enable the Sirens on the zone, or

Press to disable the Sirens on the zone.

TELEPHONE SETUP

Scroll through the programming menu until ‘4-1. Voice Dial Setup’ is displayed

and press .

Note: After completing the Telephone Setup press to return to the top

level programming menu.

ENEN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elro HA68S Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elro HA68S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info