Bedienungsanleitung Engenius Durafon 4X - SP922 (Seite 15 von 27) (Englisch)

490413

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Broadcasting a group of handsets

Enter the Group ID and then press BROADCAST key

b. Hear bi-bi-beep while the initiating handset broadcast all

handsets within communication coverage

c. Start to speak the message to be broadcasted once you

hear the “beep” sound; the speakerphone of destination

handsets will be opened up

Release BROADCAST key to end the broadcasting

Broadcasting an individual handset

Enter the Handset ID and then press BROADCAST key

b. Hear bi-bi-beep while the initiating handset broadcast all

handsets within communication coverage

c. Start to speak the message to be broadcasted once you

hear the “beep” sound; the speakerphone of destination

handsets will be opened up

Release BROADCAST key to end the broadcasting

Notes:

1. You need to continuously press BROADCAST key when

doing broadcast. The broadcast will be over once user

release the key.

2. You need to notice that there is no bi-bi-beep sound

when receiving a broadcast.

3. You can press the SILENT (Left) soft key if you choose

to ignore the call. The SILENT key operation is valid only

for the current call. You can silent all broadcast by

turning off the ringer to set auto-silence from the handset

menu.

Redial

Press REDIAL (Left) soft key.

The LCD shows the last phone number dialed. To dial this

number, press DIAL (Left) soft key.

Use Up or Down Arrow Key to scroll through the last 10 phone

numbers dialed. Select and press DIAL key.

[Note] Intercom numbers (Handset ID) are not stored in the

last 10 numbers dialed log.

Receiving a Telephone Call

1. When an incoming call arrives, the ringer will ring or vibrate

unless the ringer has been turned off.

If the handset is on the charger cradle (ringer will be

temporarily switched to “Ring” if it has been set to “Vibrate”),

lift the handset and start the conversation.

3. If the handset is not on the cradle, press any key (except END,

and the Silent soft key) to answer.

Notes:

1. You can press SILENT (Left) soft key if you choose to ignore

the call. Unlike turning off the ringer (from the handset menu),

the SILENT key operation is valid only for the current call.

2. If Caller ID service is available, the LCD will display the

incoming call information. If the LCD shows “Private” or

“Unknown”, the caller’s information may have been blocked by

the caller or the originating phone company.

Receiving an Intercom Call

1. When an intercom call arrives, the ringer will ring or vibrate

unless the ringer has been turned off. Press TALK to answer

the intercom call.

If the handset is on the charger cradle (ringer will be

temporarily switched to “Ring” if it has been set to “Vibrate”),

lift the handset and start the conversation.

If the handset is not on the cradle, press any key (except END

and the SILENT soft key) to answer.

Notes:

1. The LCD displays the caller’s Handset ID.

2. You can press the SILENT if you choose to ignore the call. Unlike

turning off the ringer the SILENT key operation is valid only for the

current call.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius Durafon 4X - SP922 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info