Bedienungsanleitung Engenius Durafon 4X - SP922 (Seite 16 von 27) (Englisch)

490413

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Ending a Call

To end a telephone or intercom call, press END key or place

handset into charging cradle.

Adjusting Receiver (Earpiece) Voice Volume

Voice volume can only be adjusted during a call.

2. There are 6 levels of volume selections. Default as volume 4.

Use ¿andÀ scrolling key to adjust.

3. The new setting remains effective for all future calls until

changed.

Placing a Call On Hold

1. When a call is in progress, it can be put on hold by pressing

the HOLD (Right) soft key.

To return to the conversation, press “UNHOLD”

Notes:

1. The call being placed on hold can only be removed from HOLD

by the handset that puts it on hold.

2. Handset LCD displays a call is being on hold. An alert tone

(double beep) every 30 seconds will remind the handset that a

call is being on hold.

3. If the operation (e.g., call transfer) after putting a call on-hold

fails, the held call may be dropped.

4. You can power off the handset (e.g., change battery) while call

is on hold. After power on again, you can continue the call by

pressing UNHOLD (Left) soft key or select “3” from the Option

menu to terminate the hold state.

5. You can only unhold the call when within the coverage area

of the base. Once you’re out of the base coverage, you can

return to stand-by using “Clear hold” function in the OPTION list

item #3.

Mute

1. After a link is established, you can press OPTION (Left) soft

key and press “0” to mute the handset microphone.

When mute is active, the other party will not hear your voice,

but you can still hear the other party.

To end the mute, press “UNMUTE” (Left) soft key. Mute is

effective only for the current call.

Do Not Disturb (Silent Ring)

1. Enter the key sequence MENU – Sounds – Ring Volume, then

select “Off”. Press SAVE to confirm your choice. This will turn

off the ringer until it is turn on again from the menu.

For temporary silencing the ringer when an incoming call

arrives, press SILENT (Left) soft key.

Key Guard

1. To prevent accidental dialing, you can press Menu (Right) soft

key, then press “1” to select KeyGuard option. The handset

keypad is locked. No key entry is accepted except the power

on/off key.

To unlock the keypad, press “UNLOCK” (Left) soft key, then,

within 2 seconds, press the digit “1” to unlock.

Key Guard is in effect until unlocked or powered off.

To View Missed Call(s)

1. Whenever you have missed incoming call(s), you can press

VIEW soft key to enter the call logs information.

You need to subscribe the caller ID service from local telecom

company to retrieve this data.

Battery Recharge and Replacement

1. Charge the battery when one or several of the following

happen:

a. Phone beeps twice every two seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius Durafon 4X - SP922 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info