Bedienungsanleitung Engenius EP 801 (Seite 18 von 152) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

458104

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

~35~

Advanced Operations

Handset Registration

1. If your handset(s) is purchased as part of a system, it has been pre-

registered with the base station at the factory.

2. If Handset ID as “00,” that means it is a new handset or the ID has been

erased. You need to register the handset with the base station.

Registration:

Press MENU-7 to enter the registration mode

Press and hold the base’s Registration (REG)

button for 2 seconds until the and LEDs

lighting up and flashing, also the base will emit

ringing to remind you the base is in the registration

mode..

Press handset key “1”, this completes the

registration process. The base station will assign a

handset ID between 12 and 19. The assigned ID

will be displayed on the handset LCD, indicating

successful registration.

Repeat above steps for all additional handsets.

De-registration:

You can de-register the handset you’re using from

the base. De-registration will reset the Handset ID

to 00, erase the system security code, and free up

the old ID for future registration.

After deregistration, the handset will not be able to

use the base to make or receive phone calls, nor

can it intercom other handsets.

Press MENU-7 to enter the registration mode

Press and hold the base’s REG button for 2

seconds until the and LEDs lighting up

and flashing.

Press the handset number key “2”, this completes

the de-registration process. Upon successful de-

registration, the handset will show ”Please

~36~

Notes:

1. The base has a 30 second registration timeout starting from

pressing the REG button. The handset has a 12 second

registration timeout starting from the registration or de-

registration option has been selected. The base and handset

will automatically exit registration mode after timeout.

2. Repeat registration or de-registration process if unsuccessful.

Handset Group Subscription

Up to nine handset groups (91-99) can be defined and

handsets can decide which group(s) they want to be

in.

For example, Group 1 represents the Customer

Service Group, Group 2 represents the Sales Group,

and Group 3 is the Marketing Group. Suppose that

Handset 11 wants to receive incoming rings for all

Sales and Marketing related calls. Then handset 11

will need to “subscribe” to Group 2 and Group 3.

Call Settings

2.Group Setting

SELECT

BACK

Group Selections:

Press handset MENU-4 to enter the Call Settings

Press number “2”, handset enters group setting

menu.

Press OPTION soft key and followed by “1” key to

subscribe the group (“9＃”, ＃:1~9). Enter 1~9.

Repeat for all desired groups.

Delete group selections by pressing OPTION soft

key and followed by “2” to Unsubscribe the group.

Notes:

1. The handset can change group affiliations at any time.

2. The base is not responsible for group assignments.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP 801 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP 801

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info