Bedienungsanleitung Engenius EP 801 (Seite 19 von 152) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

458104

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

~37~

Consequently, it cannot de-subscribe a handset from a group.

3. When an outside line or an intercom caller enters a group ID, all

handsets subscribed to this group will ring. The first handset to

answer will establish a link with the caller. Afterward, it is a one-

to-one call, not a one-to-many call.

Call Transfer

While a telephone call is in progress, you can transfer it between different

handsets or transfer to base.

Direct transfer from handset

Press key to put the call on hold.

Press XFER (Right) soft key, followed by the

destination handset ID or BASE (Left), then the held

call will be transferred directly.

After the call transferred to destination handset or

Base, the original handset will go back to standby

mode automatically.

Indirect transfer from handset

If you want to talk to the destination handset or Base

before the call transferred, you can follow with below

method:

During the call, press key, followed by entering

the destination handset ID or BASE (Left).

Press the or of the destination handset or

press the key of base to answer the intercom

call, you can now talk to the destination handset. After

the talking, press to end the intercom call, then the

destination handset is able to pick up the incoming call.

After the call transferred to destination handset or

Base, the original handset will go back to standby

mode automatically.

~38~

Direct transfer from base

Press base key to put the call on hold.

Re:

When call on hold, the base In Use & speakerphone LED

will be flashing.

Enter the destination handset ID followed by key,

the destination handset will ring, press

or key

destination handset

to pick up the call.

After the call pick up by destination handset, the base

will go back to standby mode automatically.

Indirect transfer from base

If you want to talk to the destination handset before the

call transferred, you can follow with below method:

Press the destination handset ID followed by the base

key to intercom the destination handset.

Press the or of the

destination

handset to answer

the intercom call, you can now talk to the destination handset.

After the talking, press base to end the intercom call,

then the

destination

handset will pick up the held incoming

call.

Notes: If the destination handset does not answer after handset

paging timeout, the call is routed back to the originating handset.

Phonebook Operations

You can store up to 50 entries in the phonebook.

Each entry can contain a phone number or handset ID

(up to 26 digits) and a name (up to16 characters).

To access the phonebook, press MENU (Right) soft

key, follow by “2”; or press scrolling key

while the

handset is in standby mode.

Main Menu

2.PhoneBook

SELECT BACK

To add a new entry:

Press ADD (Left) soft key.

Enter the name when LCD prompts “Name?” Use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP 801 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP 801

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info