Bedienungsanleitung Engenius EP 801 (Seite 20 von 152) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

458104

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

~39~

DELETE (Right) soft key to delete the last digit

entered. When completed, press SAVE (Left) soft

key to save.

Re: Up to 16 characters can be entered as the

name.

You will then be prompted to enter a number

for the

name just entered.

Re: Up to 26 digits can be entered as the number.

After entering the number, press the SAVE (Left)

soft key to save this entry into phonebook.

Enter a phonebook entry without a name, the all

records without name will be placed on top of the

phonebook list.

To enter the name, press the corresponding

keypad number one or more times according to the

order of the character on the key.

See table below for a list of available characters

and their orders. For example, press “2” once for

the character “A”, twice for “B”, etc.

Notes:

When enter a phone number, the cursor automatically advances to

the next digit field. Use or scrolling key to move the

cursor backward or forward to insert or delete (the digit above the

cursor, or left of the cursor if cursor is on the right of the last digit).

When entering a name, the cursor automatically advances to the

next character field if you press a different key for the next character.

If you need to enter consecutive characters from the same key, you

can wait for the cursor to advance or use or scrolling key

to move the cursor backward or forward manually. Also use or

to move the cursor to insert (to the left of the cursor) or delete

(the character above the cursor, or left of the cursor if cursor is on

the right of the last character).

By default, all letters are entered in the upper case. Use the * key to

toggle between upper and lower cases.

A “Pause” entry represents a 1 second delay in dialing the following

digits, which is useful when calling a sequence of segmented

numbers (e.g., access code, credit card number, auto-attendant

entries, etc.) Pause is entered by pressing the * key twice (LCD

displays P). Entering pause twice (PP) will result in 2 seconds pause

in the dialing.

~40~

Character Table:

Key Characters and Orders

1 ‘ + , . * ( ) & 1

2 A B C 2

3 D E F 3

4 G H I 4

5 J K L 5

6 M N O 6

7 P Q R S 7

8 T U V 8

9 W X Y Z 9

0 0

＊

Space – when in character editing.

＊– when in number editing.

Space & ＃ – when in character editing

＊ & P (Pause) – when in number editing

4. The entries are alphabetically sorted and stored as a list in an ascending

order (A to Z) from the top of the list.

5. The first line of LCD display shows name and the 2

line shows the

phone number. If the phone number is longer than 16 digits, press

OPTION (Right) soft key and select Option 3 to view the complete

number.

6. To search for a record:

Use scrolling key to enter the Phone Book mode.

b. Press a key that corresponds to the first character of the name you

are looking for.

c. For example, you are looking for “EnGenius”, and then press the

number “3” once.

Use

or scrolling key to locate the exact record you are

looking for.

To erase phonebook:

Use

or scrolling key or the alphabetical

search method to locate the record to be erased or

edited.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP 801 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP 801

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info