Bedienungsanleitung Etna EEO146A (Seite 2 von 6) (Englisch)

558367

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Instructions for Use

Important

 If you have bought this appliance to replace an old one

equipped with a lock that cannot be opened from inside

(lock, bolt), make sure that the lock is broken. This will make

it impossible for children to lock themselves inside

the appliance and suffocate.

 The appliance must be correctly connected to the mains

supply. (see: Connecting to the Mains Supply).

 If the food has strange smell or color, throw it away, because

it is very likely that it is spoiled and therefore dangerous to

eat.

 Disconnect the appliance from the power supply before

repairing it (only a qualified technician should repair it),

before cleaning and before replacing the light bulb.

 Do not defrost the appliance with other electric appliances

(as for example with hair dryer) and never scrape the frost

layer with sharp objects. Use only enclosed tools or tools

recommended by the manufacturer.

 For the sake of environment protection - be careful not to

damage the rear wall of the appliance (the condenser unit or

the tubes - for example when moving the appliance) or any

part of the refrigerating system inside the appliance.

 The refrigerating system of the appliance is filled with

refrigerant and oil, so when the appliance is damaged,

handle it with care and dispose it of in compliance with

environmental protecting precautions. (See We Care for the

Environment).

 If the supply cord is damaged, it must be replaced by the

manufacturer or his service agent or a qualified person in

order to avoid hazard.

 The rating plate is inside the appliance or outside on the rear

wall.

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over

to the applicable collection point for the recycling

of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment and

human health, which could otherwise be caused by

inappropriate waste handling of thisproduct. For more

detailed information about recycling of this product,

please contact your local city office, your household waste

disposal service or the shop where you purchased the

product.

Disposing of the Worn Out Appliance

 When your appliance finally wears out, dispose it of. If the

appliance has a lock, break it, in order to prevent eventual

accidents (danger of children get locked inside the

appliance).

 The refrigerating system of the appliance is filled with

refrigerant and insulating substances which should be

separately treated and processed. Call your nearest

authorised service agent or specialised servicing centre. If

you don't find one, contact your local authorities or your

distributor. Be careful not to damage the tubes on the rear

wall of the appliance (danger of pollution).

 To avoid pollution of the environment make sure not to

damage the hose at the bottom of the appliance.

Placing and Installation

Choosing the Right Place

Place the appliance in a dry and regularly ventilated room.

Allowed ambient temperature depends on the model (class) of

the appliance and is stated on the rating plate of the appliance.

Never place the appliance near heat emitting devices (e.g.

cooker, radiator, water heater or similar devices) and do not

expose it to direct sunlight.

The appliance should be positioned at least 3 cm away from

the electric or gas cooker and at least 30 cm away from the oil

or coal stove. If this is not possible, use an appropriate

insulation.

Class Ambient temparature

SN (subnormal) from + 10°C to + 32°C

N (normal) from + 16°C to + 32°C

Connection to Power Supply

Connect the appliance with the cable and plug to the power

supply socket outlet with a ground terminal (safety socket).

Required nominal voltage and frequency are indicated on the

rating plate.

The connection to the mains supply and earthing have to be

made according to current standards and regulations. The

appliance resists temporary voltage tolerance up to -6 to +6 %.

Adjusting the height of the appliance

The appliance is equipped with four adjustable legs, so that the

height may be adjusted from 82 to 90 cm. The height must be

adjusted prior building the appliance into the opening slot, and

it should be set at such height that the top panel of the

appliance fits exactly below the kitchen worktop (see Mounting

Instructions).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Etna EEO146A Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Etna EEO146A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info