Bedienungsanleitung Eufab 11411 - Bike Two (Seite 7 von 20) (Deutsch, Englisch, Französisch, Italienisch)

807232

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

WARNING

1 x Rack table, left

1 x Rack table, right

1 x Table traverse

1 x Base

2 x Connection plate

1 x U-shaped bracket

1 x License plate holder

1 x Protective mould, left

1 x Protective mould, right

1 x Light set

4 x Wheel stopper

6 x Tensioning strap, short

1 x Frame holder, short

1 x Frame holder, long

1 x Frame holder, wheel to wheel

6 x Lock screw M6 x 70

2 x Washer 18 x 6.4 x 1

2 x Nut M6

4 x Hexagonal screw M8 x 50

4 x Washer 15.8 x 8.1 x 0.8

2 x Hexagonal screw M5 x 30

8 x Washer 14 x 5.1 x 1

6 x Nut M5

1 x Hexagonal screw M16 x 1.5 x 90

4 x Knob nut M6

2 x Plastic plug 60 x 30

1 x Tensioning strap, long

1 x Hook

1 x Installation wrench

3. SPECIFICATIONS

Weight: approx.15 kg

Maximum payload 35 kg (with a permitted supporting load of 50 kg)

40 kg (with a permitted supporting load of 60 kg)

40 kg (with a permitted supporting load of 75 kg)

1. PROPER USE OF THE PRODUCT

2. SCOPE OF DELIVERY

The BIKE TWO bicycle rack is mounted to the trailer tow bar of a car and is

designed for the transportation of up to two bicycles.

Intended use also includes the observation of all information provided

in these operating instructions, particularly the observance of safety

instructions. Any other use is considered improper and can lead to

property damage or personal injur y. EAL GmbH assumes no liabilit y for damage

resulting from improper use.

3.1 COUPLING REQUIREMENTS

CONTENTS

Please read the operating instructions carefully prior

to use and observe all safety instructions!

Retain the original packaging, the proof of purchase

as well as these instructions for subsequent reference!

When passing on the rack, please include these opera-

ting instructions as well. Not observing such may lead

to personal injury, damage to the device or to your

property! Please check content of package for integrity

and completeness prior to use!

1. PROPER USE OF THE PRODUCT ____________________ 7

2. SCOPE OF DELIVERY ___________________________ 7

3. SPECIFICATIONS _____________________________ 7

3.1 COUPLING REQUIREMENTS _______________________ 7

4. SAFETY NOTES AND IMPORTANT INFORMATION __________ 7

5. OPERATING INSTRUCTIONS ______________________ 8

5.1 MOUNTING THE BICYCLE RACK ____________________ 8

5.1.1 MOUNTING THE USHAPED BRACKET ________________ 8

5.1.2 MOUNTING THE USHAPED BRACKET ________________ 9

5.1.3 MOUNTING THE REAR LIGHTS _____________________ 9

5.1.4 LAYING THE ELECTRICAL CABLES ___________________ 9

5.1.5 MOUNTING THE LICENSE PLATE HOLDER/INSERTING THE _____

LICENSE PLATE ______________________________ 9

5.1.6 MOUNTING THE WHEEL STOPPERS __________________ 9

5.1.7 MOUNTING THE FRAME HOLDER ___________________ 9

5.2 MOUNTING THE BICYCLE RACK ON THE TRAILER TOW BAR ____ 9

5.3 MOUNTING THE BICYCLES TO THE RACK _______________10

5.3.1 TRANSPORT OF EBIKES ________________________10

6. MAINTENANCE AND CARE _______________________10

7. NOTES REGARDING ENVIRONMENTAL PROTECTION ________ 10

8. CONTACT INFORMATION ________________________10

BIKE TWO for trailer tow bar rack for up to

2 bicycles

• The trailer tow bar must be approved in its construction.

• Ball and ball rod must have been forged in one piece.

• Mount the bicycle rack only on a coupling made of steel St52-3, grey cast

iron GGG52 or better.

• Unsuitable ball rods made of GGG40.

• The D-value of the tow bar ball must be at least 7.6 kN

• Never mount the carrier on a coupling made of aluminium, other light

metals or plastic.

• These are manufactured e.g. by Westfalia for the following vehicles:

Observe the tow bar manufacturer information on your type plate. If in

doubt, ask your manufacturer directly whether their trailer tow bar is

suitable.

4. SAFETY NOTES AND IMPORTANT INFORMATION

Personal injury or property damage due to loss of the bicycles.

Driving without safety straps can lead to accidents.

• Before embarking on any journey, check the correct and  rm seating of the

strap around the bicycles and U-shaped bar of the rack.

• Before embarking on any journey check the correct and  rm seating of

both straps around the front wheel and the strap around the rear wheel

of the bicycle.

• If necessary tighten the straps again.

• Before embarking on any journey, check to make sure the straps used are

undamaged and not worn.

• Damaged or worn straps must be replaced with undamaged ones before

you embark on your journey. Only straps authorised by EAL GmbH for the

purpose may be used.

Driving with a mounted bicycle rack will a ect the driving characteristics

of your vehicle.

• Adjust your speed to the new driving characteristics.

• Never drive faster than 130 km/h.

• Avoid sudden or jerky steering movements.

• Remember that your vehicle is longer than usual.

Personal injury or property damage due to changed vehicle driving

characteristics.

• The warning triangle labels all instructions important to

safety. Always follow these otherwise you could injure

yourself or damage the device.

• Children may not play with the device.

• Cleaning and user maintenance may not be carried out by

children without supervision.

• Do not treat packaging material carelessly. This may

become a dangerous plaything for a child!

• Only use this product for its designated purpose!

• Do not manipulate or disassemble the device!

• For your own safety, only use accessories and spare

parts that are stated in these instructions or that are

recommended by the manufacturer!

Manufacturer Test symbol Suitable for

Westfalia F 4192 Audi A4

F 3830 Audi A6

F 4112 Audi A8

Eufab 11411 - Bike Two Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info