Bedienungsanleitung Eufab 11569 - Crow Basic (Seite 10 von 20) (Deutsch, Englisch, Französisch, Italienisch)

807226

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Insert the short tensioning strap from the inside to the outside

below the bike holder and then from the outside to the inside

through the slots of the bike holder (Figure 15). For the rear wheel

of the bicycle, use the centre slot of the wheel holder, for the front

wheel, use the two outer slots (two tensioning straps to prevent the

front wheel from turning).

5.4 MOUNTING THE SHORT TENSIONING STRAPS

Figure 14: 6 x short tensioning strap

Figure 15: Mounting the tensioning

straps



The  rst bicycle is placed in the  rst bicycle rail (closest to the

vehicle) and secured to the U-shaped bracket with the short frame

holder. To do this, use the side of the frame holder with the tensio-

ning strap to secure to the bicycle frame. The wheels are secured by

placing the tensioning straps around the wheel rim of your bicycle

and tightening the straps. Caution: The front wheel must be secured

with two small tensioning straps to prevent it from turning (Figure

16). The second bicycle is used placed in the second rail, facing the

opposite direction and secured to the U-shaped bracket with the

long frame holder. The wheels are secured in the same way as for

the  rst bicycle. It may be necessary to o set the individual bicyc-

les di erently on the rack to ensure that the frame holders may be

correctly secured. Now secure the bicycles with the long safety strap.

Wrap the safety strap through the bicycle frames and the U-shaped

bracket and tighten. (See Figure 17)

5.5 MOUNTING THE BICYCLES TO THE REAR RACK

Without this safety strap, the bicycle rack may

not be used.

Figure 16: Tensioning straps for front wheel



Figure 15: Safety strap

Safety strap

5.6 FOLDING UP THE BICYCLE RACK

First fold the wheel rails back onto the rack table. Push the locking

mechanism of the rear lights (Position 1 in Figure 18) outwards, and

then swivel the light mount back (Position 2 in Figure 18). Push it

 rmly against the rack table until it engages perceptibly. Proceed

accordingly on the other side of the rack.

In order to store the bicycle rack as  atly as possible, you can also fold

the U-shaped bracket down. To do this, undo the two knob nuts until

the U-shaped bracket comes out of the locking mechanism. Now you

can fold the U-shaped bracket down onto the rack table.

Figure 18: Folding in the rear lights

6. MAINTENANCE AND CARE

• After use, store the bicycle rack in a clean and dry place. Wash any

mud or other dirt o using water.

• Keep the rack tow bar clean and free of grease.

• Check the bicycle rack regularly for damages. Damaged or worn

parts must be replaced immediately. Only original replacement

parts may be used.

• Check the bolts and nuts of the bicycle rack regularly and tighten

when necessary.

• Immediately treat any damage to paintwork with paint.

• Regularly lubricate rotating and moving parts.

7. NOTES REGARDING ENVIRONMENTAL PROTECTION

8. CONTACT INFORMATION

EAL GmbH

Otto-Hausmann-Ring 107

42115 Wuppertal, Germany

+49 (0)202 42 92 83 0 info@eal-vertrieb.com

www.eal-vertrieb.com

+49 (0) 202 42 92 83 – 160

Due to its lighting system, the bicycle carrier is an

electrical device.

Do not dispose of electrical appliances in household

waste! Discarded electrical and electronic equip-

ment must be collected separately and recycled in an

environmentally sound manner.

Contact your municipal or city government on how to

dispose of old electronic equipment.

The materials are recyclable. You are making an

important contribution to protecting our environment

through recycling, material recycling or other forms of

re-utilising old appliances!

Dispose of the bicycle rack in accordance with the laws

and conditions in your country.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufab 11569 - Crow Basic Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info