Bedienungsanleitung Eufy RoboVac L70 Hybrid - T2190 (Seite 21 von 128) (Englisch)

755671

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

38 39

English English

Voice Alert

When RoboVac encounters a problem, the red indicator on RoboVac will be flashing and

you will hear the relevant voice prompts. Follow the voice prompts to solve the problems.

Voice Prompt Cause and Solution

Error 1: Front bumper stuck

Front bumper is stuck. Tap it repeatedly to remove any

dust;

if not, then move the device to a new position and try

again.

Error 2: Wheel stuck. Check

the wheel and move it to a new

position.

Wheel may be stuck or trapped. Clear any obstacles

in the surrounding area and check the wheel for any

trapped dust. Move the device to a new position and

try again.

Error 3: Side brush stuck Side brush may be stuck. Please clean it and try again.

Error 4: Rolling brush stuck.

Remove and clean the rolling

brush.

Remove the rolling brush, roller joint, roller brush cover,

and suction inlet to clean it. Once cleaned, place the

items back into the device and try again.

Error 5: Device trapped. Clear

the surrounding area.

Device is trapped. Clear any obstacles in the

surrounding area and try again.

Error 6: Device trapped. Place

device near the position where

the problem occurred.

Device may be suspended in air. Move it to a new

position close to the original position and try again. If

the device is still unable to start, clean the edge sensor

and try again.

Error 7: Wheel suspended.

Please move the device to a new

position.

Wheels may be suspended in air. Move the device to

a flat surface and a new position close to the original

position then try again.

Error 8: Low battery, shutting

down device. Please charge your

device.

Low Battery; system will shut down. Charge the device

and try again.

Error 9: Magnetic Boundary

Strip detected. Move device to a

different area.

Device is too close to a strong magnetic field or strip.

Move the device to a different area and try again.

Error 11: Front infrared sensor

needs cleaning.

Front infrared sensor is blocked by dust and requires

cleaning.

Error 12: Right wall sensor needs

cleaning.

Clean the right side wall sensor since it's covered in

dust.

Error 13: Device tilted. Please

put the device on a flat surface

to start.

Device may be tilted. Put the device on a flat surface

and try again.

Voice Prompt Cause and Solution

Error 14: Please insert dust

collector and filter.

Put the dust collector and filter back in and confirm

that they are in place. Then restart the device.

Error 17: Restricted area

detected. Move device to a

different area.

Device is too close to the restricted area. Move the

device to a new position and try again.

Error 18: Laser cover may be

stuck.

Pressure sensor for laser cover is stuck. Move the

device to a new position and try again.

Error 19: Laser sensor may be

stuck.

Laser ranging sensor is covered in dust. Clean it and try

again.

Error 20: Laser sensor may be

blocked.

Laser sensor is blocked by:

• An empty environment

• Metal mirrors

• Other multi-reflection devices

Remove any obstacles and move the device to a

different area.

Error 21: Charging Base blocked

by surrounding obstacles

Charging base is blocked by obstacles, clear any

obstacles around the charging base and try again.

Error S1: Battery Error. Refer

to Owner's Manual or App for

help.

- Open the battery compartment and check whether

the battery is connected and restart the device.

- Battery Temperature may be too high or low; wait

until the battery falls to normal temperatures before

usage (0 ° ~ 40 ° C/C 32 ° F to 104 ° F).

- If the issue persists, contact customer support for

help.

Error S2: Wheel Module Error.

Refer to Owner's Manual or App

for help.

- Check whether the wheels are stuck or dust is

trapped inside before restarting the device.

- If the issue persists, contact customer support for

help.

Error S3: Side Brush Error. Refer

to Owner's Manual or App for

help.

- Check whether the side brush is stuck in an unknown

object before restarting the device.

- If the issue persists, contact customer support for

help.

Error S4: Suction Fan Error. Refer

to Owner's Manual or App for

help.

- Check whether the fan blades are stuck in an

unknown object before restarting the device.

- Clean the dust collector and filter before restarting

the device.

- If the issue persists, contact customer support for

help.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufy RoboVac L70 Hybrid - T2190 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eufy RoboVac L70 Hybrid - T2190

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info