Setting the week timer using the remote control
In advance: Setting the week timer can be done using remote the control, but it is easier
using the APP. As soon as the heater has a WiFi connection, you can no
longer use the timer function on the remote control. The function buttons
concerned will automatically switch off.
Attention: Timer setting made with the remote control are not visible in the
APP and timer settings made with the APP are not visible on the
heater’s display. As soon as there is a WiFi connection, you can no
longer make a new timer setting using the remote control.
Therefore, never mix the two methods for setting the times!
Attention: If the infrared panel is switched OFF using the main switch or by
removing the plug from the socket, the day will be set to 1 and
the time to 00.00 the next time you switch the heater ON again.
However, the timer data that were entered previously (ON and OFF times of
the week timer) are stored. To avoid misunderstandings, the week timer is
automatically set to OFF in case of turning the heater off using the main
switch or removing the plug from the socket. Otherwise, the panel would
switch on and off at the wrong times.
Switching the week times on again is described below.
Please note that the abovementioned does not apply when using the Eurom
Smart APP. The APP updates the time automatically and therefore, you do not
have to enter the time manually.
Attention: If in the time setting mode no button is pressed for five (5)
seconds, the timer-setting mode will stop and you will have to
start all over again.
Attention: All timer settings – maximum 28 settings: seven (7) days
multiplied by maximum four (4) settings per day – are processed
consecutively. therefore, make sure that they do NOT contain
contradictions.
