2. U1-U7, day of the week
3. Timer setting number of the day concerned (1, 2, 3 or 4)
4. The set temperature of the thermostat
5. Start time in hours
6. Stop time in hours
This is repeated for the next timer settings.
All 28 timer settings are shown, also the timer settings that have not been filled. The
temperature of the non-filled timer settings is 20 °C.
Open-window detection system (not applicable for Wifi control)
Press the button on the remote control. The symbol will appear on the heater’s
display. If the ambient temperature decreases 8°C or more within 15 minutes, the heater
will turn off and the related symbol will flash.
If this is the case and you press this button again, the heater will resume its normal
operation.
ECO button
If the ECO button on the remote control is pressed, the display will show EC. The heater
will start to heat if the ambient temperature drops to below 16 °C and will turn off if the
ambient temperature increases to above 16 °C. Pressing the ECO button again will switch
off the ECO mode.
Wifi and app operation
The heater can also be controlled with an app on your smartphone. To do this, the heater
must be connected to a Wifi modem.
Download the Eurom Smart App
- Scan the QR code below or search for ‘Eurom Smart’ in the App store or Google Play
and follow the download instructions.
- The Eurom Smart App will be added.
- For more information about the App see: www.eurom.nl/nl/manuals.
Safety precautions App
Safety and remote operation
Your Eurom heater can be easily operated, via the same WLAN, via a different
WLAN, or via a 3G or 4G mobile network. This makes it possible to operate your
heater remotely, without your direct supervision. Beware that even when
operating the heater remotely, all safety precautions stated in the user manual