Overheating safeguard
In case of internal overheating, the overheating safeguard will switch the heater off. This
may occur if the heater cannot give off enough heat or if it cannot draw in enough fresh
air. As mentioned above, this is generally caused by (partially) covering the heater, or
installing the heater too close to a wall or something similar. In case of overheating, switch
off the heater and unplug. Give the heater time to cool down, remove the source of the
overheating and use as normal. If the problem persists or if you have not been able to
trace the source of the overheating, turn the heater off immediately and unplug. Contact a
servicing point to have the heater repaired.
Cleaning and maintenance
Keep the heater clean. Switch off the heater, remove the plug from the socket and allow
the heater to cool down before cleaning or carrying out maintenance work.
• Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use
aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions;
This can cause irreparable scratches and damage! You can use a glass cleaner for the
‘Verre’ models. Never use cloths that are too wet, dry the appliance properly and
ensure that the entire unit is dry before taking it back into use.
• You can keep the back of the heater free of dust with a feather duster. For thorough
cleaning of the back, you can take the heater from the wall.
• If you want to store the Mon Soleil at the end of the season, remove it from the wall,
unscrew the suspension frame (if applicable) and store the entire unit (in the original
packaging) upright in a cool, dry and frost-free place.
Disposal
At its end of life, discard the device according to the local laws and regulations, or deliver
the device to your supplier.
