485594
29
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
...milk is not frothy enough?
The milk is too hot or too old or the
fat content is too high. Use suitable
milk.
Blocked steam nozzle. Clean the
steam nozzle.
The air intake in the frothing aid is
blocked. Clean the frothing aid.
... the bean container will not locate
on the grinder?
Coffee bean residue on or around
the grinder: Remove coffee bean
residue from the grinder.
Coffee bean residue is jammed in the
bean container lock. Clear the bean
container lock of coffee bean
residue.
... the grinder makes very loud noises
when grinding?
The grinder is blocked by a foreign
body. Remove the foreign bodyas
described in this manual, refer to
„Cleaning the Grinder“.
You can continue to use your coffee
machine with ground coffee.
... the coffee machine has to be
transported?
Keep the original packaging as
transport protection.
Secure the coffee machine against
jarring.
Empty the coffee machine tank and
container and allow any remaining
moisture in the system to steam off.
This will protect your coffee machine
from being damaged by freezing in
cold weather.
To steam off the system, remove
water tank and then select the
steam function. When no more
steam is released, turn off the steam
tap and switch off the coffee
machine.
Care should also be taken with the
location of the coffee machine –
especially in cold weather, when
damage can be caused by freezing.
GB
•... «CARRY OUT CLEANING
PROCESS» is displayed?
Number of coffees dispensed
necessitates cleaning: Run cleaning
program; see „Running the Cleaning
Program“.
•... «CARRY OUT DESCALING»
is displayed?
Number of coffees dispensed
necessitates descaling: Carry out
descaling; see „Running the
Descaling Program“.
... the espresso/coffee is not hot
enough?
Preheat the cups with hot water.
Increase coffee temperature; see
„Setting the Coffee Temperature“.
The coffee machine may need
descaling.
... the espresso/coffee is too weak?
not enough ground coffee: spoon in
correct measure, max. 2 measuring
spoons.
The coffee bean container is empty.
Add coffee beans.
The coffee quantity is set too low.
Increase the coffee quantity, see
„Changing and saving the coffee
quantity“.
The grinding texture is set too
coarse. Set the grinding texture to a
finer grade, see „Setting the
Grinding Texture“.
...the crema is too weak?
Use fresh water.
Use fresh beans or fresh coffee
powder.
Clean the coffee-making unit, see
„Cleaning the Coffee-making Unit“.
• …..”LOOSEN BREW UNIT”?
- Remove the brewing unit and
loosen the brewing unit with at
least 3 revs. on the back side,
using the tool function of the
measuring spoon P.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fagor CAT 44NG wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info