Bedienungsanleitung Fein FMM 250 (Seite 12 von 107) (Deutsch, Holländisch, Dänisch, Italienisch, Portugiesisch, Polnisch, Schwedisch, Norwegisch)

78185

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

For your safety.

Read all safety warnings and all instruc-

tions. Failure to follow the warnings

and instructions may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

Do not use this power tool before you have thor-

oughly read and completely understood this

Instruction Manual and the enclosed “General

Safety Instructions” (document number

3 41 30 054 06 1). The documents mentioned should be

kept for later use and enclosed with the power tool,

should it be passed on or sold.

Please also observe the relevant national industrial safety

regulations.

Intended use of the power tool:

for sanding small surfaces, corners and edges, for sawing

thin parts of steel sheet, wood and plastic, for scraping,

polishing, rasping, cutting and separating without water in

weather-protected environments, using the application

tools and accessories recommended by FEIN.

Special safety instructions.

Hold power tool by insulated gripping surfaces, when per-

forming an operation where the cutting accessory may con-

tact hidden wiring or its own cord. Cutting accessory

contacting a “live” wire will make exposed metal parts of

the power tool ‘“live” and shock the operator.

Use clamps or another practical way to secure and support

the workpiece to a stable platform. Holding the work by

hand or against your body leaves it unstable and may lead

to loss of control.

Grasp the power tool in such a safe manner that your body

never comes into contact with the application tool, espe-

cially while working with application tools such as saw

blades or other blades pointed toward the grasping range.

Touching sharp tips or cutting edges can lead to injuries.

Wear personal protective equipment. Depending on the

application, use a face shield or safety goggles. Wear a

dust mask. Wear hearing protection. The eye protection

must be capable of protecting against flying particles gen-

erated by the various different operations. The dust mask

or respirator must be capable of filtering particles gener-

ated by your operation. Prolonged exposure to high

intensity noise may cause loss of hearing.

Wear protective gloves. Danger of injury due to sharp-

edged accessories.

Do not rivet or screw any name-plates or signs onto the

power tool. If the insulation is damaged, protection against

an electric shock will be ineffective. Adhesive labels are

recommended.

Clean the ventilation openings on the power tool at regular

intervals using non-metal tools. The blower of the motor

draws dust into the housing. An excessive accumulation

of metallic dust can cause an electrical hazard.

Before putting into operation, check the mains connection

and the mains plug for damage.

Hand/arm vibrations

The vibration emission level given in this information

sheet has been measured in accordance with a standard-

ised test given in EN 60745 and may be used to compare

one tool with another. It may be used for a preliminary

assessment of exposure.

The declared vibration emission level represents the

main applications of the tool. However if the tool is used

for different applications, with different accessories or

poorly maintained, the vibration emission may differ.

This may significantly increase the exposure level over

the total working period.

An estimation of the level of exposure to vibration

should also take into account the times when the tool is

switched off or when it is running but not actually doing

the job. This may significantly reduce the exposure level

over the total working period.

Identify additional safety measures to protect the opera-

tor from the effects of vibration such as: maintain the tool

and the accessories, keep the hands warm, organisation

of work patterns.

Character Unit of measure,

international

Unit of measure, national Explanation

V V Rated voltage

W W Power input

W W Output

f Hz Hz Frequency

1/min 1/min Rated oscillation rate

dB dB Sound power level

dB dB Sound pressure level

pCpeak

dB dB Peak sound pressure level

K… Uncertainty

m/s

Vibration emission value (triax vector sum)

determined according to EN 60745

m, s, kg, A, mm, V,

W, Hz, N, °C, dB,

min, m/s

m, s, kg, A, mm, V, W,

Hz, N, °C, dB, min,

m/s

Basic and derived units of measure from the

international system of units SI.

WARNING

3 41 01 078 06 0.book Seite 12 Dienstag, 16. März 2010 7:39 07

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fein FMM 250 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fein FMM 250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info