Bedienungsanleitung Felisatti SCF190 (Seite 5 von 40) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

502496

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

TECHNICAL DATA

Circular saws SCF165/1200 SCF190/1600S SCF210/1900S SCF210/1900VES

Input power W 1200 1600 1900 1900

No-load speed rpm 4700 4800 5000 2300-5000

Saw blade diameter mm 165 190 210 210

Max./min. saw blade diameter mm 165/160 190/180 210/200 210/200

Max./min. set width mm 2,5 2,5 2,5 2,5

Saw blade hole diameter mm 20 20 30 30

Depth of cut at 90° mm 55 63 75 75

Depth of cut at 45°

mm 37 42 51 51

Depth setting mm 0-55 0-63 0-75 0-75

Inclination setting 0-45° 0-45° 0-45° 0-45°

Approx. weight (w/o

accessories) according

EPTAProcedure 01/2003

Kg. 4,5 5,6 6,4 7,8

Follow very carefully the instructions in this manual, save it

and keep it close at hand, ready to carry out any inspection

of parts that may be necessary.

If the tool is used with care and normal maintenance is carried

out, it will work well for a long time.

The functions and use of the tool you have bought shall be

only those described in this manual. Any other use of the

tool is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION (See gures)

A HM saw blade. (Fig. 1)

B Riving knife setting screw (Fig. 1)

C Mobile blade guard (Fig. 1)

D Saw blade setting disc (Fig. 1)

E Disc setting screw (Fig. 1)

F Riving knife (Fig. 1)

G Depth setting wing nut (Fig. 2)

H Lateral stop setting wing nut (Fig. 3)

I Lateral stop (Fig. 1)

J Safety push button switch (Fig. 2)

K On-/off switch (Fig. 2)

M Cutting line guide (Fig.3)

N Sawdust extraction (Fig. 1)

EQUIPMENT

- 1 lateral stop

- 1 disc clamping key

- Operating instructions

- Safety instructions

- Warranty

BRIEF DESCRIPTION

This tool is specially designed for straight sawing only of

boards made from wood and derivatives (plywood, chipboard

etc.).

BEFORE USING THIS TOOL

Before using the tool, make sure the mains voltage is correct:

it must be the same as that on the specication label.

Machines with 230V can also be connected to a 220V mains

supply.

Before plugging in the tool, always make sure the control

switch K works properly and returns to the OFF position

when released.

START UP

WARNING! Only plug in when machine is switched off.

Press the locking button J, and squeeze the trigger in the on/

off switch K. When the on/off switch is released, the machine

stops.

CONSTANT ELECTRONICS (SCF210/1900VES)

The built-in module permits:

- Soft start.

- The maintenance of a practically constant rated speed

up to rated power.

Overload protection

- The motor will stop if an overload occurs. The machine

should be immediately removed from the piece being worked

and allowed to operate off-load at maximum revolutions

during some thirty seconds in order to cool the motor.

FITTING THE DISC

WARNING! Always unplug the machine before carrying out

any work on it.

CAUTION: Do not use bent or cracked blades or high-speed

steel blades. Do not use saw blades that do not conform to

the specications contained in these instructions.

1. Move the mobile guard C backwards and hold it in

place.

2. To loosen or tighten the screw E with the key supplied with

the machine, secure the blade with the aid of a screwdriver

as follows: turn the blade guard to the side and turn the blade

until the hole lies under the saw shoe and insert a screwdriver

in the hole so that the blae does not move (or place the saw

on a piece of wood).

3. Loosen the screw E and remove the setting disc D.

4. Fit the saw blade and tighten with the setting disc D and

the screw E.

5. Before tting the new blade, make sure the surfaces in

contact with the setting discs are clean. The teeth of the saw

should protrude beyond the riving knife F. (The arrow printed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti SCF190 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info