Bedienungsanleitung Ferm ATM1042 (Seite 5 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch, Finnisch)

763846

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

purposely to distort the compressed air tank.

• Do not perform any actions on the

compressor without first having taken the plug

out of the plug socket.

• Do not aim water jets or jets of flammable

liquids at the compressor.

• Do not place flammable objects near the

compressor.

• Switch the pressure regulator to the “0”

position (OFF) during dwell time.

• Never aim the air jet at persons or animals.

• Do not transport the compressor with the tank

pressurised.

• N.B.: some parts of the compressor such as

the head and the feed-through pipes may

reach high temperatures. Do not touch these

parts to avoid burns.

• Transport the compressor by lifting it or by

using the special grips or handles.

• Children and animals should be kept far away

from the area of operation of the machine.

• If you use the compressor to spray paint:

a) Do not work in enclosed spaces or near

naked flames.

b) Make sure that the environment in which

you will be working has dedicated

ventilation.

c) Protect your nose and mouth with a

dedicated mask.

• Do not use the compressor when the

electrical cable or the plug is damaged, and

instruct an authorised Support Service to

replace them with an original part.

• When the compressor is placed on a surface

higher than the floor, it should be secured to

prevent it from falling down during operation.

• Do not put objects or your hands in the

protective covers to avoid physical damage

and damage to the compressor.

• Do not use the compressor as a blunt

instrument against persons, objects or

animals in order to prevent serious damage.

• If the compressor is no longer in use, always

take the plug out of the plug socket.

• Always make sure that compressed-air hoses

are used for compressed air and which are

characterised by a maximum pressure

adjusted to that of the compressor. Do not try

to repair the hose if it is damaged.



Never use any oxygen, inflammable

gases or compressed air from gas

bottles to supply pressure to this

appliance, due to the hazard of explosion

and the potential for serious injury.



Connect an air hose to the appliance using a QD

(quick-detachable) coupling. The QD coupling

also disengages the air pressure from the tool

when it is disconnected.

Air hoses

Air hoses should be able to sustain a working

pressure of at least 10 Bar. The air supply hose

should be equipped with a QD coupling to enable

”quick uncoupling” from the air stapler.



Only use clean, regulated compressed air for this

tool.



For safe operation of the air stapler, a pressure

regulator with an operating range of 4-7 Bar is

required for regulation of the working pressure.

Do not connect the air stapler to an air pressure

that might possibly exceed 10 Bar, as this may

cause damage to the air stapler, and could also

result in injuries.



Never exceed the recommended maximum

pressure, as this will cause a substantial increase

in the rate of wear. The air supply must be

sufficient to maintain the appliance’s working

pressure. Should the pressure diminish, the

driving power of the air stapler will be reduced.

See “TECHNICAL SPECIFICATIONS” for the

correct working pressure of the air stapler.



Dirt and water in the air supply are the main cause

of wear on pneumatic tools. An oil and water

separator will help to ensure clean air pressure

for the best performance and least wear on the

air stapler. The oil and water separator must be

regularly tapped off, in order to function effectively

in supplying clean air pressure to the tool. Consult

the manufacturer’s instructions for the correct

maintenance of the oil and water separator.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm ATM1042 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info