Bedienungsanleitung Ferm BGM1003 (Seite 5 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

510132

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

BENCH SANDER

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europeís leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive Warranty.

We hope you will enjoy using this product for

many years to come.

The numbers in the following text refer to the

drawing on page 2-4

Read the operating instructions carefully

before using this device. Familiarize

yourself with its functions and basic

operation. Service the device as per the

instructions to ensure that it always

functions properly. The operating

instructions and the accompanying

documentation must be kept in the

vicinity of the device.

Description

This machine combines all the advantages of a

horizontal and a vertical belt sander with those of

a disc sander. Its sturdy construction in cast iron

and steel makes the machine suitable for every

sanding job.

Contents:

1. Technical specification

2. Safety instructions

3. Before putting the machine into operation

4. Putting the machine into operation

5. Maintenance

1. Technical specification

Machinedata

Voltage 230 V, 50 Hz

Power input 375 W

30 min*

No load speed sander belt 275 m/min

No load speed sander disc 1400 /min

Sanding belt size 915 X 100 mm

Sanding disc size Ø 150 mm

Weight 16.5 kg

Lpa (Sound pressure level) 78.6+3 dB(A)

Lwa (Sound power level) 91.6+3 dB(A)

= Maximum period of operation with a

capacity of 375 W

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in

EN 60745; it may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

signifi cantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

List of parts

Fig.1 + 6

1. Machine frame

2. Motor

3. Roller stop and parallel stop

4. Clamping handle

5. Transport roller

6. Sanding belt

7 On/off switch

8. Fence

9. Drive roller

10. Aluminium disc

11. Sanding disc

12. Work plate

13. Mitre scale

14. Supporting arm

2. Safety instructions

Explanation of the symbols

Denotes risk of personal injury, loss of

life or damage to the tool in case of non-

observance of the instructions in this

manual.

Indicates electrical shock hazard.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm BGM1003 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info