764187
5
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
5
Ferm
EN

If the moulded 3-pin plug attached to the unit is
damaged and needs replacing, it is important that
it is correctly destroyed and replaced by an
approved BS 1363/5A fused plug and that the
following wiring instructions are followed.
The wires in the mains cable are coloured in
accordance with the following code:
blue neutral
brown live
As the colours of the wires in the mains cable of
the unit may not correspond to the coloured
markings identifying the terminals in the plug,
proceed as follows:
- The wire which is coloured blue must be
connected to the terminal which is marked with
theletterNorcolouredblack.
- The wire which is coloured brown must be
connected to the terminal which is marked with
the letter L or coloured red.
TECHNICAL DATA
BSM1023
Mainsvoltage V~ 230
Mainsfrequency Hz 50
Powerinput W 950
No-loadspeed m/min 380
Sandingbeltsize mm 75x533
Sandingpadsize mm 76x135
Protectionclass IP20
Weight kg 3.65
NOISE AND VIBRATION
BSM1023
Sound pressure (Lpa) dB(A) 92.3
Acoustic power (Lwa) dB(A) 103.3
Uncertainty (K) dB(A) 3
Vibration(maingrip) m/s2 2.31
Uncertainty (K) m/s2 1.5
2
Wear hearing protection.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordancewithastandardisedtestgiveninEN
60745;itmaybeusedtocompareonetoolwith
another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
maysignicantlyincreasetheexposurelevel
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signicantlyreducetheexposurelevel
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
yourhandswarm,andorganizingyourwork
patterns

Your belt sander has been designed for rough
sanding applications on wood, metal, plastics and
painted surfaces.
1. On/offswitch
2. Lock-on button
3. Sanding pad
4. Sanding belt roller
5. Clamping lever for sanding belt
6. Centring knob for sanding belt
7. Maingrip
8. Auxiliarygrip
9. Dustbagconnection
10. Carbonbrushholder
11. V-beltcover
ASSEMBLY
3 Before assembly, always switch off the
machine and remove the mains plug
from the mains.
Mounting and removing the sanding belt

Mounting
● PlacethemachineonitssidewiththeV-belt
cover (11) facing downwards.
● Releasetheclampinglever(5).
● Mountasandingbelt(12)withtherequired
grainsizearoundthesandingpad(3)andthe
sandingbeltrollers(4).Makesurethatthearrow
on the inside of the sanding belt points in the
same direction as the arrow on the housing.
- Useacoarsesandingbelt(grain50)for
sanding rough, uneven surfaces.
- Useamediumsandingbelt(grain80)for
removing the remaining scratches from the
coarse sanding belt.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferm BSM1023 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info