Bedienungsanleitung Ferm CTM1018 (Seite 8 von 52) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

763693

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

c) Direct the discharge of the spinning wire

brush away from you. Small particles and

tiny wire fragments may be discharged at high

velocity during the use of these brushes and

may become imbedded in your skin.

Battery tool use and care

a) Recharge only with the charger specified by

the manufacturer. A charger that is suitable

for one type of battery pack may create a risk of

fire when used with another battery pack.

b) Use power tools only with specifically

designated battery packs. Use of any other

battery packs may create a risk of injury and

fire.

c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

Service

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

For the charger

Intended use

Charge only rechargeable battery packs. Other

types of batteries may burst causing personal

injury and damage.

a) The appliance is not to be used by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they

have been given supervision or instruction

b) Children being supervised not to play with

the appliance

c) Do not recharging non-rechargeable

batteries!

d) During charging, batteries must be placed

in the well ventilated area!

e) Integrated batteries may only be removed

for disposal by qualified personnel. Opening

the housing shell can destroy the power tool.

To remove the battery from the power tool,

press the On/Off switch (5) until the battery

is fully discharged. Unscrew the screws on

the housing and remove the housing shell

in order to remove the battery. To prevent a

short circuit, disconnect the connectors on

the battery one at a time and then isolate the

poles. Even when fully discharged, the battery

still contains a residual capacity, which can be

released in case of a short circuit.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Your machine is double insulated,

therefore no earthwire is required.

2. MACHINE INFORMATION

Intended use

This power tool is intended to function as a

grinder, sander, wire brush, polisher, carving or

cut-off tool. This combitool is great for editing

of materials like wood, plastic, stone, shell

aluminium, brass and steel. Always use the proper

accessories and speed setting.

Technical specifications

Rechargeable Battery 8V Li-ion 900mAh

Charger CDA1111

Input of charger 100-240V~ 50/60Hz 0.2A

Output of charger 9.0V d.c. 0.5A

Battery charging time 2-3hours

Maximum disc diameter Ø35 mm

No load speed 5.000–25.000/min

Capacity of spring chuck 3.2 mm

Weight 0.26 kg

Lpa (Sound pressure level) 76+3 dB(A)

Lwa (Sound power level) 87+3 dB(A)

Vibration 2.35+1.5 m/s2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CTM1018 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info