Bedienungsanleitung Ferm MSM1040 (Seite 9 von 160) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

762257

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in EN

62841-1; it may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

significantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2-5.

1. Lock-off button

2. Handle

3. On/off switch

4. Protective guard

5. Retracting protective guard

6. Saw blade

7. Adjustable fence

8. Knob for table extension

9. Fence

10. Table extension

11. Table

12. Mounting holes

13. Kerf plate

14. Knob for mitre adjustment

15. Lever for mitre adjustment

16. Scale for mitre angle

17. Indicator for mitre angle

18. Laser

19. Indicator for bevel angle

20. Scale for bevel angle

21. Workpiece clamp

22. Knob for bevel adjustment

23. Roller

24. Depth adjustment bolt

25. Slide rails

26. Dust bag

27. Carrying handle

28. Dust outlet

29. Locking bolt for slide rails

31. Stop bolt for 45° bevel angle

32. Stop bolt for 0° bevel angle

33. Screw retraction arm

34. Locking bolt for table extension

35. Locking bolt for adjustable fence

36. Adjustment bolt for fence

37. Front tilt protector

38. Position lock knob

39. Grub screw

40. Screw

41. Clamping flange

42. Clamping bolt

43. Spindle lock

44. Knob for workpiece clamp

45. Plate for depth adjustment

46. Laser switch

48. Screws for laser adjustment

50. Lock nut for 0° bevel angle

51. Fence bolts

3. ASSEMBLY

Before carrying out any work on the

machine, disconnect the mains plug

from the power supply.

Transport position

Fig. B

The position lock knob (38) makes it easier to

move the power tool when transporting it to

various working locations.

Unlocking the transport position (work position)

1. Press the handle (2) downwards slightly;

2. Pull the position lock knob (38) fully outwards

and lock it in place by turning it;

3. Slowly move the handle (2) upwards.

Locking the transport position (transport

position)

Before locking in transport position, make sure

that the depth adjustment bolt (24) is adjusted

to unlimited depth. This way, the handle (2) can

be moved fully downwards without touching the

depth stop. Also, remove all accessories that

cannot be securely fitted to the machine.

1. Loosen the locking bolt for slide rails (29) if

tightened;

2. Pull the handle (2) forwards towards yourself

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1040 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info