Bedienungsanleitung Ferm MSM1040 (Seite 12 von 160) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

762257

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

For all cuts, it must first be ensured that

the saw blade at no time can come in

contact with the fence, workpiece clamp

or other machine parts. Remove any

mounted auxiliary stops or adjust them

accordingly.

Supporting the workpiece

Fig. A, G

Workpieces must always be properly supported.

The table extensions (10) can be extended left

and right to support a workpiece. To do so:

• Move the table extension (10) to the desired

position;

• Rotate the knob for table extension (8) inwards

or outwards until the table extension is

positioned level on the work surface.

When sawing extra-long workpieces, the free

end of long workpieces must have something

additionally placed underneath it or be supported.

Clamping the workpiece

Fig. G

Workpieces must always be firmly clamped. The

workpiece clamp (21) can be placed left and right

of the workpiece. To do so:

1. Ensure the workpiece is firmly pressed against

the fence (9);

2. Insert the supplied workpiece clamp (21) into

one of the holes intended for this purpose, as

can be seen on figure G;

3. Adjust the threaded rod of the workpiece

clamp (21) to the workpiece height;

4. Firmly tighten the threaded rod of the

workpiece clamp (21) to fix the workpiece

in place. To loosen, simply untighten the

threaded rod of the workpiece clamp (21).

The knob for workpiece clamp (44) can be used

to more quickly adjust the height of the workpiece

clamp (21). After adjusting the height, always

firmly tighten the threaded rod of the workpiece

clamp (21) to fix the workpiece in place.

Adjusting the fence

Fig. G

Always adjust the fence to the specific

type of cut.

When sawing mitre and/or bevel angles, you have

to move the adjustable fence (7) depending on

the cutting direction. This way, the workpiece is

always properly supported by the fence under

each condition. To do so:

1. Loosen the locking bolt for adjustable fence (35);

2. Adjust the fence according to the desired cut.

For mitre or straight cuts the fence has to be

moved inwards towards the blade (max 8 mm)

without touching it. For bevel cuts, the fence

has to be moved outwards away from the

blade (max 8 mm) without touching it;

3. Tighten the locking bolt for adjustable fence (35);

4. To ensure the blade won’t get in touch with the

adjustable fence (35), it is advised to make a

test run of the movement of the blade, without

turning the machine on.

Adjusting the mitre angle

Fig. A

The mitre angle can be adjusted between 45°

left side and 45° right side. For quick and precise

setting of commonly used mitre angles, presets

are provided on the saw table on 0°, 15°, 22.5°,

30° and 45° angles.

Adjusting the mitre angle to a preset:

1. Loosen the knob for mitre adjustment (14);

2. Push the lever for mitre adjustment (15) and ro-

tate the table (11) left or right to the desired pre-

set. The angle can be read on the scale for mitre

angle (16) using the indicator for mitre angle (17).

3. Release the lever. The lever must be felt to

engage in the detent of the preset.

4. Tighten the knob for mitre adjustment (14).

Adjusting the mitre angle to any required angle:

1. Loosen the knob for mitre adjustment (14);

2. Pull the lever for mitre adjustment (15) and rotate

the table (11) left or right to the desired position.

The angle can be read on the scale for mitre

angle (16) using the indicator for mitre angle (17).

3. Release the lever and tighten the knob for

mitre adjustment (14).

Adjusting the bevel angle

Fig. A, B

The bevel angle can be set between 0° and +45°

to the left side. To do so:

1. Loosen the adjusting knob for bevel adjustment

(22);

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1040 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info