Bedienungsanleitung Ferm MSM1040 (Seite 13 von 160) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

762257

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

2. Tilt the saw by using the handle (2) until the

indicator (19) reads the desired position on the

scale for bevel angle (20);

3. Tighten the adjusting knob for bevel

adjustment (22).

Switching the machine on/off

Fig. A

• To start the machine, press and hold the lock-

off button (1) and press the on/off switch (3).

• To stop the machine, release the on/off switch

(3).

Making a cross cut

Fig. H, I

Follow these steps to cut perpendicular to the

grain of the wood:

1. Adjust the mitre angle to and the bevel angle to

0°;

2. Move the adjustable fence to the inner

position, towards the blade. The maximum

distance between the adjustable fence (35) and

the saw blade (6) is 8mm, as shown on figure J.

Make sure the fence does not touch the blade.

3. Firmly clamp the workpiece;

4. Turn on the machine. Make sure that the saw

blade has reached full speed;

5. Now bring the handle slowly downwards so

that the saw blade cuts through the piece of

work and passes through the slot in the table.

Do not put undue pressure on the saw, let the

machine do the work;

6. Bring the handle gently up again and switch it

off by letting go of the switch.

Making a mitre cut

Fig. I, J

Follow these steps to make an angled cut to the

face of the wood:

1. Adjust the mitre angle to the desired position

and the bevel angle to 0°;

2. Move the adjustable fence to the inner

position, towards the blade. The maximum

distance between the adjustable fence (35) and

the saw blade (6) is 8mm, as shown on figure I.

Make sure the fence does not touch the blade.

3. Firmly clamp the workpiece;

4. Turn on the machine. Make sure that the saw

blade has reached full speed;

5. Now bring the handle slowly downwards so

that the saw blade cuts through the piece of

work and passes through the slot in the table.

Do not put undue pressure on the saw, let the

machine do the work;

6. Bring the handle gently up again and switch it

off by letting go of the switch.

Making a bevel cut

Fig. K, L

Follow these steps to make an angled cut to the

edge of the wood:

1. Adjust the mitre angle to 0° and the bevel

angle to the desired position ;

2. Move the adjustable fence to the outer

position, away from the blade. The maximum

distance between the adjustable fence (35) and

the saw blade (6) is 8mm, as shown on figure L.

Make sure the fence does not touch the blade.

3. Firmly clamp the workpiece. Ensure the

workpiece clamp is placed on the right side;

4. Turn on the machine. Make sure that the saw

blade has reached full speed;

5. Now bring the handle slowly downwards so

that the saw blade cuts through the piece of

work and passes through the slot in the table.

Do not put undue pressure on the saw, let the

machine do the work;

6. Bring the handle gently up again and switch it

off by letting go of the switch.

Making a compound cut

Fig. L, M

Follow these steps to make a combination of

mitre and bevel cut:

1. Adjust the mitre angle and the bevel angle to

the desired position ;

2. Move the adjustable fence to the outer

position, away from the blade. The maximum

distance between the adjustable fence (35) and

the saw blade (6) is 8mm, as shown on figure L.

Make sure the fence does not touch the blade.

3. Firmly clamp the workpiece. Ensure the

workpiece clamp is placed on the right side;

4. Turn on the machine. Make sure that the saw

blade has reached full speed;

5. Now bring the handle slowly downwards so

that the saw blade cuts through the piece of

work and passes through the slot in the table.

Do not put undue pressure on the saw, let the

machine do the work;

6. Bring the handle gently up again and switch it

off by letting go of the switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1040 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info