498004
18
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
18
DF 700 EQ
GB
Observe the following instructions:
X
To ensure constant air circulation, always
keep the cooling air openings in the hous-
ing clean and free of blockages.
X
Clean the guides [3-1] and [3-6] of dust
deposits.
X
Oil the guides regularly and lightly with
resin-free oil (e.g. sewing machine oil).
L
We recommend an annual inspection and/
or a check after approx. 100 operating
hours at an authorised customer service
workshop. This is for the safety of the
user and the value stability of the power
tool.
10 Troubleshooting
11 Accessories
Use only original Festool accessories and
Festool consumable material intended for
this machine because these components are
designed specifically for the machine. Using
accessories and consumable material from
other suppliers will most likely affect the
quality of your working results and limit any
warranty claims. Machine wear or your own
personal workload may increase depending
on the application. Protect yourself and your
machine, and preserve your warranty claims
by always using original Festool accessories
and Festool consumable material!
The order numbers of the accessories and
tools can be found in the Festool catalogue or
on the Internet under "www.festool.com".
Festool provides comprehensive accessories
which allow you to use your machine effec-
tively and for diverse applications, e.g.:
Handrail fence RA-DF 500/700
Cross stop QA-DF 500/700
Stopper LA-DF 500/700
Assembly instructions are included at the
end of the operating manual.
12 Disposal
Do not throw the power tool in your house-
hold waste! Dispose of machines, accesso-
ries and packaging at an environmentally re-
sponsible recycling centre. Observe the valid
national regulations.
Fault Cause Solution
Burns Blunt cutter Use sharp cutter
Dowel hole too narrow.
DOMINO dowel cannot be
jointed.
a.Blunt cutter
b.Deposits (e.g. chippings in
the dowel hole)
a.Use sharp cutter
b.Remove deposit and work
with dust extractor
Widening of the dowel hole
with 8 mm cutter
Routing depth too large
(larger than 50 mm)
Reduce routing depth
(max.50 mm)
Splinters at edge of dowel
hole
Excessive feed rate Reduce feed rate
Dowel hole not parallel to
workpiece edge
Workpiece has shifted during
processing
Secure workpiece properly
Tool cannot be loosened dur-
ing tool change
Spindle lock not functioning Twist spindle against the tool
using an open-ended spanner.
If this occurs several times
contact the after-sales service
department.
The positions of the dowel
holes which are created with
one of the left and one of
the right stop pins do not
match precisely.
The stop pins are selected
different on the right and
left.
Select the same stop pins on
the left and the right.
DOMINO joining machine
operates irregularly, jerks
a.No dust extractor connect-
ed
b.Rubber buffer [1-1] worn
a.Connect dust extractor
b.Replace rubber buffer (spare
part)
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Festool DOMINO XL DF 700 EQ wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info