Bedienungsanleitung Festool EHL 65 E (Seite 8 von 54) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

498031

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

One handed planer

Technical data EHL 65 E

Power 720 W

Speed (no load) 15 600 rpm

Plane width 65 mm

Chip thickness 0 - 4 mm

Max. rebate depth 23 mm

Weight (excluding cable) 2.4 kg

Degree of protection

/ II

The speciﬁ ed illustrations can be found at the

beginning of the operating instructions.

Graphical symbols

Caution. Danger!

Read the operating instructions/notes

Wear ear protection!

Wear a protective mask!

1 Intended use

The tool together with the available Festool ac-

cessories is designed for processing wood, soft

plastics and similar materials.

The user is liable for damage and injury

resulting from incorrect usage!

2 Safety instructions

2.1 General Safety Rules

WARNING! Read all safety warnings and

all instructions. Failure to follow the warnings and

instructions may result in electric shock, ﬁ re and/

or serious injury.

Save all warnings and instructions for future

reference.

The term „power tool“ in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

2.2 Tool-speciﬁ c safety rules

- Wait for the cutter to stop before setting the

tool down. An exposed rotating cutter may

engage the surface leading to possible loss of

control and serious injury.

- Hold the power tool by insulated gripping

surfaces only, because the cutter may contact

its own cord. Cutting a „live“ wire may make

exposed metal parts of the power tool „live“ and

could give the operator an electric shock.

- Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by your hand or against the

body leaves it unstable and may lead to loss of

control.

- Wear suitable personal protection equipment:

Ear protection to reduce the risk

of damaging your hearing; Protec-

tive goggles; Face mask to reduce

the risk of inhaling harmful dust;

Protective gloves when handling

tools and coarse materials.

2.3 Noise and vibration information

The typical values determined in accordance with

EN 60745 are:

Sound-pressure level 82 dB(A)

Sound-power level 93 dB(A)

Measuring uncertainty allowance K = 3 dB

Wear ear protection!

Overall vibration levels (vector sum for three di-

rections) measured in accordance with EN 60745:

Vibration emission level (3 directions):

< 2,5 m/s²

Uncertainty K = 1,5 m/s²

The speciﬁ ed emissions values (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary

estimates regarding vibration and noise loads

during operation.

– They represent the primary applications of the

power tool.

Increase possible for other applications, with oth-

er insertion tools or if not maintained adequately.

Take note of idling and downtimes of machine!

3 Power supply and start-up

The mains voltage must correspond to

the speciﬁ cation on the rating plate.

To switch on, ﬁ rst press the switch lock (2.5) and

then the switch (2.4) (press = ON, release = OFF).

4 Electronics

The tool has full-wave electronics with

the following features:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool EHL 65 E Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info