Bedienungsanleitung Festool EHL 65 E (Seite 10 von 54) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

498031

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

rebating depth which has been set can be read

against the notch (1.9).

9.2 Parallel guide

The parallel guide (1.7) is ﬁ tted with a rotary knob

(1.5) in the threaded hole (2.10) on the left side of

the tool.

When planing along an edge a planing width of

between 0 and 65 mm can be set with the stop

after loosening the catch (1.6).

10 Working with the EHL 65 E

- The surface to be planed must be free of metallic

objects.

- First set The desired chip thickness.

- Place The front platen onto The workpiece but do

not allow The planer head to come into contact

with The wood.

- Switch on the planer.

- Guide The planer over The workpiece so that The

platen rests ﬂ at on The workpiece. Press on The

front planer platen when starting to plane and

on The rear planer platen (end of workpiece)

when continuing or ﬁ nishing planing.

10.1 Chamfering

The front planer platen is equipped with a 90° V

groove (2.11) to allow the chamfering of workpiece

edges. This V groove is 2 mm deep, thus produc-

ing a 2 mm edge chamfer with the chip thickness

setting 0.

10.2 Bench-mounted operation

The planer can be operated bench-mounted in

conjunction with the bench-mounting device SE-

EHL (488 524). Detailed instructions are supplied

with the accessories.

11 Accessories, tools

For your own safety, use only original

Festool accessories and spare parts.

The accessory and tool order number can be found

in the Festool catalogue or on the Internet under

“www.festool.com”.

12 Maintenance and care

Always remove the power supply plug

from the socket before carrying out any

work on the machine.

All maintenance and repair work which

requires the motor casing to be opened

may only be carried out by an authorised

service centre.

Customer service and repair. Only

through manufacturer or service work-

shops: Please ﬁ nd the nearest address

at:: www.festool.com/Service

EKAT

Use only original Festool spare parts!

Order No. at: www.festool.com/Service

The cool air openings in the motor casing must

always be kept clean and unobstructed to ensure

air circulation.

The tool is ﬁ tted with special motor brushes with

an automatic cut-out. When the brushes become

worn the power supply is shut off automatically

and the tool comes to a standstill.

13 Disposal

Do not throw the power tool in your household

waste! Dispose of the machine, accessories and

packaging at an environmentally-responsible recy-

cling centre! Observe the valid national regulations.

EU only: European Directive 2002/96/EC stipulate

that used electric power tools must be collected

separately and disposed of at an environmentally

responsible recycling centre.

Information on REACh: www.festool.com/reach

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool EHL 65 E Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info