Bedienungsanleitung Festool HK132 (Seite 17 von 114) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573118

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

[6-5] Pendulum mount cover guard

[6-6] Pendulum mount

[6-7] Blade guard cover

[6-8] Blade guard

[7-1] Mounting ﬂ ange

[7-2] Clamping ﬂ ange

[7-3] Curve-cutting head

[7-4] Retaining pin

[7-5] Pendulum mount cover guard

[7-6] Pendulum mount

[7-7] Blade guard cover

[7-8] Blade guard

Some of the items illustrated or described here may

not be included in the scope of delivery.

4 Intended Use

The machine is intended for lengthways and cross-

ways cutting of wood with straight cut ting lines as

well as mitre angles to 45° while resting ﬁrmly on

the work piece. With suitable saw blades, non-fer-

rous metal, light building materials and plastic can

also be sawed.

The user alone is responsible for any liabili ties

caused by usage other than intended. Persons un-

der 16 are not permitted to use the appliance.

5 Notes on Safety Prevention

DANGER

5.1 General Safety Instructions

WARNING! Read all safety warnings and all in-

structions. Failure to follow the warnings and in-

structions may result in electric shock, ﬁ re and/or

serious injury.

Save all warnings and instructions for future ref-

erence.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-op-

erated (cordless) power tool.

5.2

Safety instructions for all saws

Cutting procedures

a) DANGER: Keep hands away from the cutting

area and the saw blade. Keep your second hand

on the auxiliary handle or the motor housing. If

both hands are holding the circular saw, they can

not be cut by the saw blade.

b) Do not reach underneath the work. The blade

guard can not protect you from the saw blade be-

low the work.

c) Adjust the depth-of-cut to the thick ness of the

work. It should not be vis ible below the work by

more than the height of a full tooth.

d) Never hold the workpiece being cut in your hand

or across your leg. Se cure the work on a ﬁ rm

support. It is important to secure the work prop-

erly to minimize the danger of body exposure,

blade binding or loss of control.

e) Hold the power tool only by the in sulated grip-

ping surfaces when per forming an operation

where the cut ting tool may run into hidden wir-

ing or its own cord. Contact with a “live” wire will

also make exposed metal parts of the tool “live”

and shock the opera tor.

f) Always use a ripping guide or straight edge

guide for length cuts. This im proves the preci-

sion of the cut and re duces the possibility of blade

binding.

g) Always use saw blades with the cor rect size and

the matching arbour shape (diamond or round).

Blades that do not match the mounting hard ware

of the saw will run eccentrically, causing loss of

control.

h) Never use damaged or incorrect blade washers

or screws. The blade washers and screws were

specially designed for your saw for optimum per-

formance and safety of operation.

5.3

Further safety instructions for all saws

Kickback causes and related warnings

- Kickback is a sudden reaction to a pinched, bound

or misaligned saw blade, causing an uncontrolled

saw to lift up and out of the workpiece toward the

operator;

- When the blade is pinched or bound tight ly by the

kerf closing down, the blade stalls and the motor

reaction drives the unit rapidly back toward the

operator;

- If the blade becomes twinsted or mis aligned in

the cut, the teeth at the back edge of the blade

can dig into the top surface of the wood causing

the blade to climb out of the kerf and jump back

toward the operator.

Kickback is the result of saw misuse and/or incor-

rect operating procedures or conditions and can

be avoided by tak ing proper precautions as given

below.

a) Maintain a ﬁrm grip with both hands on the saw

and position your arms to resist kickback forces.

Position your body to either side of the blade,

but not in line with the blade. Kickback could

cause the saw to jump backwards, but kickback

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool HK132 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info