778626
18
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
11 Accessories
WARNING
Risk of injury
Remove the battery pack from the power
tool before performing any work on the
power tool.
Always use original Festool tools and accesso
ries. Using low-quality tools or accessories
from other manufacturers may increase the
risk of injury and seriously unbalance the ma
chine, decreasing the quality of the working re
sults and accelerating power tool wear.
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festool.co.uk.
11.1 Mounting the adapter [5]
A depth stop, dust extraction device and posi
tioning aid can be mounted on the adapter. Us
ing the detent button [5-1], these can be offset
in 30° increments in line with the tool.
11.2 Dust extraction device [6]
Mount the adapter [5].
Attach the dust extraction device.
Connect the suction hose.
11.3 Depth stop [7+8]
Mount the adapter [5].
Attach the depth stop – [7a] or [7b].
Engage the adjusting lever [8-1] to set the
cutting depth.
Select the correct depth stop for the tool
and replace if necessary:
Round tools Sliding shoe [8-2]
Cutting blade Rotary depth
stop [8-3]
11.4 Positioning aid [9+10+11+12]
WARNING
Sharp tools
Pinching and cutting injuries
Always rest your fingers on the defined
gripping surfaces [11-3].
Always use the saw blades indicated in Fig.
[11]. Do not use short saw blades.
WARNING
Risk of accident, electric shock
If the tool comes into contact with live ca
bles, an electric current may be diverted
through metal components in the tool and
result in electric shock.
Hold the power tool by the insulated grip
ping surfaces when performing work that
may pose a risk of cutting into hidden pow
er cables.
Using the positioning aid
Mount the adapter [5].
Attach the positioning aid – [9a] or [9b].
First place the application tool on the saw
blade guide [10-1], then push it into the
holder [10-2] until it engages. This is nec
essary to ensure that the application tool is
positioned correctly on the saw blade guide.
Adjust the cutting depth [11-1].
Always tighten the cutting depth adjust
ment [11-1].
Readjusting the saw blade guide
First check to ensure that the application tool
has been inserted in the correct order (see fig
ure [10]). If the saw blade is still not positioned
on the saw blade guide, take the following
steps:
Set the cutting depth [11-1] to the maxi
mum depth. Tighten the cutting depth ad
justment [11-1].
Loosen the screw [12-1] on the saw blade
guide [12-2].
Move the saw blade guide to the saw blade.
Tighten the screw [12-1] on the saw blade
guide.
12 Service and maintenance
WARNING
Risk of injury, electric shock
Always remove the battery pack from the
power tool before performing any mainte
nance or service work.
All maintenance and repair work which re
quires the motor housing to be opened
should always be carried out by an author
ised service workshop.
English
18
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Festool OSC 18 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info