498080
12
Zoom out
Zoom in
Vorherige Seite
1/83
Nächste Seite
12
ROTEX
GB
Original operating manual
1Symbols
2 Technical data
3 Machine features
* not on all versions included in the scope of
delivery
The specified illustrations appear at the be-
ginning of the Operating Instructions.
4 Intended use
As specified, the machines is designed for
sanding and polishing plastic, metal, wood,
composite materials, paint/clear coats, filler
and similar materials. Materials containing
asbestos must not be processed.
To guarantee electrical safety, the machine
must not be damp or operated in a damp en-
vironment. The machine must only be used
for dry sanding.
The user is liable for improper or non-
intended use.
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings
and all instructions.
Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
Harmful/toxic dusts can be produced
during your work (e.g. lead-contain-
ing paint, some types of wood and
metal).
Contact with these dusts, espe-
cially inhaling them, can represent a haz-
ard for operating personnel or persons in
the vicinity. Comply with the safety regula-
tions that apply in your country. Connect
the electric power tool to a suitable extrac-
tion system.
To protect your health, wear a P2 pro-
tective mask.
Always wear protective goggles to pro-
tect against sanding hazards.
Prevent liquid polish from entering the
machine.
The penetration of liquid polish
into the electric power tool increases the
risk of an electric shock.
5.3 Metal processing
When processing metal, the following
measures must be taken for safety
reasons:
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Disconnect from the power supply!
Gear-driven eccentric
sander
RO90 DX
FEQ
Power 400 W
Speed
Eccentric motion 3000 - 7000 rpm
Rotex rotary motion 220 - 520 rpm
Sanding stroke 3,0 mm
FastFix sanding pad dia. 90 mm
Weight (without mains
cable, with sanding pad)
1,45 kg
Safety class /II
[1-1]
Protector
[1-2]
Change-over switch/spindle stop
[1-3]
On/Off switch
[1-4]
Mains power cable
[1-5]
Extractor connector
[1-6]
Speed control
[1-7]
Sanding pad
[1-8]
Stop rod
[1-9]
Polishing pad*
[1-10]
Delta sanding pad
[1-11]
Slat sanding pad*
[1-12]
Interface pad*
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Festool RO 90 DX FEQ ROTEX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info