Bedienungsanleitung Festool ts 75 ebq fs (Seite 18 von 94) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch)

383463

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

cutting depth and push it forward in the cutting

direction. The markings [6-2] display the absolute

front and the absolute rear cutting points of the

saw blade (dia. 210 mm) at maximum cutting

depth and using the guide rail.

5.4 Sawing aluminium

When sawing aluminium, the following

measures must be taken for safety rea-

sons:

- Preconnect a residual current circuitbreaker.

- Connect the machine to a suitable dust extractor.

- Clean the machine regularly of dust deposits in

the motor housing and in the protective cover.

Wear protective goggles.

- Aluminium must only be sawed with the special

saw blades from Festool designed for this pur-

pose.

When sawing panels, they must be lubricated with

petroleum, thin-walled proﬁ les (up to 3 mm) can

be sawed without lubrication.

6 Accessories

The order numbers of the accessories listed below

can be found in the Festool catalogue or on the

Internet under “www.festool.com”.

6.1 Parallel stop, table widener

A parallel stop can be used for section widths up

to 180 mm. The parallel stop can also be used as

a table widener.

6.2 Guide system

The guide rails, which are available in different

lengths, allow for precise, clean cuts and simul-

taneously protect the workpiece surface against

damage. In conjunction with the extensive range

of accessories, exact angled cuts, mitre cuts and

ﬁ tting work can be completed with the guide sys-

tem. The option of securing using G-clamps [6-4]

ensures a ﬁ rm hold and safe working. The guide

clearance of the saw table on the guide rails can

be set with the two setting jaws [1-3].

The guide rails are equipped with a splinterguard

[1-4], which has to be cut to size before the ﬁ rst

use:

- Set the speed of the machine to level 6,

- Place the machine on the rear end of the guide

rail,

- Switch the machine on, press it down to the set

cutting depth and cut the splinterguard along

the full length without interruption.

The edge of the splinterguard now corresponds

exactly to the cutting edge.

6.3 Multifunction table

The mutifunction table MFT/3 makes clamping

the workpiece easy and allows you to saw large

and small workpieces safely and precisely using

the guide system. Its many ﬁ elds of application

make economical and ergonomically convenient

work possible.

6.4 Saw blades, other accessories

In order to be able to saw different materials

quickly and cleanly, Festool offers saw blades that

are specially designed for your machine.

The order numbers for these and for other acces-

sories that allow you to use your Festool portable

circular saw effectively and in many ways, can be

found in the Festool catalogue or on the Internet

under “www.festool.com”.

7 Maintenance and care

Always remove the plug from the mains

supply socket before carrying out any

work on the machine!

Always keep the machine and the ventilation slots

clean. Any maintenance or repair work requiring

the motor housing to be opened may only be car-

ried out by an authorised service workshop. The

tool is ﬁ tted with special motor brushes with an

automatic cut-out. When the brushes become

worn the power supply is shut off automatically

and the tool comes to a standstill.

8 Disposal

Do not throw the power tool in your household

waste! Dispose of machines, accessories and

packaging at an environmentally-responsible

recycling centre. Observe the valid national regu-

lations.

EU only: European Directive 2002/96/EC stipulate

that used electric power tools must be collected

separately and disposed of at an environmentally

responsible recycling centre.

9 Warranty

For our tools, we give warranty for material and

production defects in accordance with the locally

applicable legal provisions, but in any case for at

least 12 months. Within the EU member states,

the warranty period is 24 months (veriﬁ cation

through invoice or delivery note). Damage caused

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool ts 75 ebq fs Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info