Bedienungsanleitung Flyer Tour - Panasonic 2018 (Seite 159 von 224) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

780034

159

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

156 157

15. Brake

Brakes are vital to your safety on the bi-

cycle. Have the setting and maintenance

work performed by your FLYER special-

ist retailer. Only original spare parts may

be used. Otherwise it is possible that the

functionality of your FLYER e-bike may

be impacted or damaged. No modica-

tions of the brake system are permitted.

The braking effect of modern brakes is

very strong. You must get used to the

braking performance of the new brakes.

Activate the brake carefully. You should

practise emergency braking in a safe,

trafc-free area so that you can safely

handle your FLYER even during very in-

tense braking manoeuvres.

Do not brake continuously or too hard on

long downhill section, as your brakes

might overheat leading to reduced brak-

ing power. Alternate between applying

the front and back brake on long and

steep downhill sections to allow the oth-

er brake to cool. It is preferable to brake

sharply for a shorter time when taking

bends or if you are riding too fast. This

allows the brakes to cool down in the

meantime. This preserves your braking

power. The only exception is if you are

cycling in slippery conditions such as on

sand or a smooth surface. You should

then exercise great care, slowing your-

self down using the rear brake. Other-

wise there is the risk of the front wheel

slipping out to the side and causing a

fall. Take regular breaks during long

downhill sections to give the brakes suf-

cient time to cool down. Do not touch

the brakes for at least 30 minutes after

riding as they can become very hot.

Source: Shimano® techdocs

Almost all modern brakes provide con-

siderably more braking power than was

available for bicycles in the past. Care-

fully familiarise yourself with the brakes,

practising using them and practise

emergency braking, starting on safe

ground with no trafc before setting out

into the trafc. Look ahead while riding.

Only use original spare parts. Otherwise

it is possible that the functionality of your

FLYER e-bike may be impacted or dam-

aged.

Adjust the brake lever to ensure that it

does not touch the handlebars when

pulled hard.

Back pedal brakes

If your FLYER is equipped with back pedal

brakes, brake by pushing the pedals backwards

instead of forwards. This means that your bicycle

will not freewheel and you are unable to rotate the

pedals backwards freely as you otherwise can.

Back pedal brakes work best when both

cranks are in a horizontal position. If one

crank is pointing up and the other one

down, less force can be applied and

braking is less effective.

The effectiveness of back pedal brakes

can deteriorate substantially on long in-

clines. This type of braking system can

become very hot from continuous brak-

ing. You should also use the rim brakes

to slow down on long inclines. Wait until

the back pedal brake has cooled down

and do not touch the brake drum.

Ensure that the brake anchor plate is

correctly attached with the appropriate

screw when removing or installing it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Tour - Panasonic 2018 Seite 159

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info