Bedienungsanleitung Freerider FR510DXXsb (Seite 23 von 48) (Englisch)

664132

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Other hand, lift the seat post vertical until the front and

rear sections have separated.

This operation is made easier if you first lower

and lock the tiller. You will find the front section is

better balanced in this position.

Please keep the rear chassis level at all times during

the de-docking operation, failure to observe this caution will

result in the two sections jamming together.

The Scooter is now dismantled into its 6 basic parts (Fig 29).

The Seat Rear Motive Powered Unit

The Batteries Steering Platform

The Basket Rear Cover

You can now load your Scooter into a suitable car.

Protect clothing when lifting Scooter parts, some

components may have lubricating fluids on their surfaces.

Work out the best practice to stow each part of your

machine, this will vary with different car designs. An old

blanket can be used to stop the various parts rubbing against

each other.

NOTE:

It is good practice to stand the batteries upright and locate

them so they do not fall over and touch the battery posts on

any metal framework. Your Scooter will increase the

load in Your car, please remember this and adjust your

driving to suit this condition.

In some midsize cars the scooter seat may need to be

stowed on the front seat of the vehicle. Use the cars safety

belt to secure the seat in position.

The body mouldings on your Scooter have not

been designed for lifting your machine. Use the firm metal

lifting handles only.

Take care when lifting heavy parts. If in doubt

always seek assistance when lifting parts in or out of your

vehicle.

Note:

Caution:

Warning:

NOTE:

Caution:

Note:

Caution:

Warning:

FIG 31

1 4

Your Scooter is very easy to re-assemble once you reach your

destination. To re-assemble, follow the preceding procedure

in reverse order, noting the following:

1. When re-assembling the front and rear sections of your

Scooter, make certain you are on firm, level

ground. Place the front and rear units close together

with the round tube of the front steering section facing

with the 'U" Shaped channel of the rear motive unit.(see

fig 30 on page 22)

With one hand support the rear motive unit at the 'C'

shaped handle keeping it level. With your other hand lift

the rear of the front steering section by the seat post and

lower it into the 'U' shaped channel, simultaneously

locate the locking pins brackets together.

Fit the safety locking pin (fig28, page 22) through the

location holes, make certain that the spring loaded safety

'clip' is firmly located into the safety "locking pin" (see fig

29 page22)

Failure to engage these safety pins correctly could

result in an accident, please take particular care.

2. Connect the electrical plugs correctly together.

you ay have them the wrong

way round, observe the locating groove in each

connector.(see fig 23, fig 26/27, page 21/22)

3. When you have replaced the batteries make certain that

they are correctly strapped down (see fig22,page21)

The battery straps simply locks together via the velcro

adhesive technique.

4. When you have re-assembled your Scooter and

fitted the rear cover and seat, switch the power key to

the 'on' position. The battery level gauge on your

console ( fig11, page 9 ) will illuminate. This will

indicate that you have re-connected the battery

connectors correctly. If the battery level gauge does not

function, then you have not connected the wiring

connectors correctly ( fig 23, fig26/27,page 21/22).

Test the drive function of your machine. Does your

Scooter move forwards and backwards correctly ? If

your Scooter does not drive, the freewheel lever may be

in the 'disengaged' position (9 bars flashing), see section

'Freewheeling your Scooter in this manual.

Your Scooter has been designed for

pavement and road use only,

DO NOT FORCE TOGETHER

Important notice:

IT IS NOT A DIRECT

REPLACEMENT FOR A SEAT IN A MOVING VEHICLE.

HOW TO RE-ASSEMBLE YOUR SCOOTER

Now enjoy your Freerider.

Warning:

HOW TO RE-ASSEMBLE YOUR SCOOTER

Warning:

NOT FORCE TOGETHER

Important

notice:

IS NOT A DIRECT

REPLACEMENT

FOR A SEAT IN A MOVING VEHICLE.

Now enjoy your Freerider.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Freerider FR510DXXsb Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info