Bedienungsanleitung Fusion Apollo MS-RA670 (Seite 12 von 18) (Englisch)

691367

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

You can save your favorite SiriusXM channels if you are

connected to an optional SiriusXM tuner and antenna.

You can save your favorite DAB stations if you are connected to

an optional DAB antenna.

Saving a Station as a Preset

With an applicable source selected, tune the stereo to a

station or a channel.

Press and hold the dial to select the PRESETS tab.

Select .

TIP: You can quickly save the selected station or channel as a

preset by holding .

Selecting a Preset from a List

With an applicable source selected, press and hold the dial to

select the PRESETS tab.

Select a preset from the list.

Removing Presets

With an applicable source selected, press and hold the dial to

select the PRESETS tab.

Select .

Select each preset you want to remove.

When you are finished removing presets, select .

FUSION PartyBus Networking

The FUSION PartyBus networking feature allows you to connect

multiple compatible stereos together on a network, using a

combination of wired or wireless connections.

The Apollo RA670 stereo does not have built-in Wi‑Fi

technology. To use the wireless functions of the FUSION

PartyBus network, you must connect the stereo to the FUSION

PartyBus network using a wired ethernet connection, and then

connect a Wi‑Fi access point or router to the FUSION PartyBus

network.

A FUSION PartyBus stereo, such as the Apollo RA670 stereo,

can stream sources to other FUSION PartyBus stereos

connected to the network. Connected FUSION PartyBus stereos

can also control media playback on the FUSION PartyBus

stereo.

A FUSION PartyBus zone stereo, such as an Apollo SRX400

zone stereo can stream from a FUSION PartyBus stereo, but

cannot stream sources to other FUSION PartyBus stereos on

the network.

FUSION PartyBus stereos cannot control the speaker volume of

another stereo. You can adjust the volume of speakers or

speaker zones connected directly to the stereo only.

In the image above, one Apollo RA670 stereo connects to a

wireless router and to two Apollo SRX400 zone stereos .

A FUSION PartyBus zone stereo, such as the Apollo SRX400,

controls the volume in a single speaker zone . A FUSION

PartyBus stereo, such as an Apollo RA670 stereo, controls the

volume on multiple speaker zones to cover a larger area with

that stereo.

Streaming from a FUSION PartyBus Stereo

on the Network

Before you can stream from a stereo on the FUSION PartyBus

network, you must set up and configure your FUSION PartyBus

stereos according to the installation instructions.

Select .

Press and hold the dial to open the PARTYBUS tab.

TIP: You can press and hold to show available FUSION

PartyBus devices.

The device shows a list of available FUSION PartyBus

stereos on the network.

Select the stereo you want to stream from.

The stereo begins streaming the same source as the connected

FUSION PartyBus stereo, and a green border appears around

the device screen. All media playback functions affect both

devices.

Stopping Streaming from a FUSION

PartyBus Device on the Network

You can leave the FUSION PartyBus network to play local

sources on the stereo.

Select .

Press and hold the dial to open the PARTYBUS tab.

Select LEAVE PARTYBUS.

You can press and hold to quickly leave the FUSION

PartyBus network.

Network UPnP Playback

This stereo can play content from Universal Plug and Play

(UPnP) devices connected to the network, such as computers

and media servers. You must connect your UPnP device to the

same network as the stereo using a wired or wireless

connection, and you must configure the device to share media

over the network. See the owner's manual from your UPnP

device for more information.

After you have connected your UPnP device to the network and

configured it to share media, the UPnP source appears on the

source selection screen of each stereo on the network

(Selecting a Source, page 1).

Network Troubleshooting

If you cannot see or connect to FUSION PartyBus devices on

the network, check the following:

• Verify that only one device, either a stereo or a router, is

configured as a DHCP server.

• Verify that all FUSION PartyBus devices, network switches,

routers, and wireless access points are connected to the

network and turned on.

• Verify that wireless FUSION PartyBus devices are connected

to a wireless router or wireless access point on the network.

• If you configured static IP addresses, verify that every device

has a unique IP address, that the first three sets of numbers

in the IP addresses match, and that the subnet masks on

every device are identical.

• If you have made configuration changes that might be

causing networking issues, reset all network settings to

factory defaults.

General Settings

Select > SETTINGS.

8 FUSION PartyBus Networking

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion Apollo MS-RA670 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-RA670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info