Bedienungsanleitung Fusion Apollo MS-RA670 (Seite 13 von 18) (Englisch)

691367

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

NOTE: When an check box is filled, the option is on. When the

check box is clear, the option is off.

ZONE: Enables you to configure the speaker zones (Speaker

Zone Settings, page 9).

BRIGHTNESS: Adjusts the screen and dial backlight brightness

(Adjusting the Backlight and Dial Brightness, page 1).

TUNER REGION: Sets the region used by the FM, AM, DAB,

and SiriusXM sources.

LANGUAGE: Sets the language on the device.

DEVICE NAME: Sets a name for this stereo.

TELEMUTE: Sets the behavior of the mute function when the

device is connected to a hands-free mobile phone. When a

call is received, the device can either mute the audio or

broadcast the call through the Aux input. See your hands-free

kit instructions.

SEARCHING: Enables FUSION Alpha Search Technology

(FAST), which allows you to quickly search for tracks by letter

or number. You can select a number to enable the FAST

menu if your music device contains more than the selected

number of items.

POWER OPTIONS: Adjusts power settings, such as the power-

save mode (Power Options, page 9).

PARTYBUS SETTINGS: Sets the sources the device can

stream over the FUSION PartyBus network. You may want to

disable some sources, such as Optical, because streaming

over the network introduces a small audio lag that is not

desirable in some situations.

NETWORK: Enables you to configure the device network

settings (Network Settings, page 9).

UPDATE: Updates the stereo or connected devices (Update

Options, page 10).

ABOUT: Shows the software version information for the stereo.

Speaker Zone Settings

Setting a Zone Name

You can set a name for a speaker zone to make it easier to

identify.

Select > SETTINGS > ZONE.

Select a zone.

Select ZONE NAME.

Use the on-screen keyboard to enter a name, and select .

Linking Zones

You can link zones 1 and 2 to keep the volume levels

synchronized. Adjusting the volume of either of the linked zones

affects both zones.

Select > SETTINGS > ZONE > ZONE 2 > LINK TO ZONE

When zones 1 and 2 are linked, appears on zones 1 and 2 on

the volume screen.

NOTE: After zones 1 and 2 are linked, you cannot adjust the

volume of each zone individually.

Enabling Volume Control of Zone 3 from a Connected

Amplifier

By default, the volume of zone 3 is controlled by the stereo, but

you can control the it using the connected amplifier instead.

Select > SETTINGS > ZONE.

Select zone 3.

Select VOLUME CONTROL to clear the check box.

The audio signal from the zone is provided to the amplifier as a

fixed-line-level output.

Disabling a Zone

You can disable an unused zone and remove it from the audio

level pages. When a zone is disabled, you cannot change any of

the settings for that zone. You cannot disable zone 1.

Select > SETTINGS > ZONE.

Select a zone.

Select ZONE ENABLED to clear the check box.

Disabling the Internal Amplifiers

If you do not connect speakers directly to zones 1 and 2, you

can disable the internal amplifiers to reduce power consumption.

Select > SETTINGS > ZONE.

Select INTERNAL AMP ON to clear the check box.

Power Options

Select > SETTINGS > POWER OPTIONS.

NOTE: When an check box is filled, the option is on. When the

check box is clear, the option is off.

POWER SAVE: Disables the LCD backlight after one minute of

inactivity to save battery power.

STANDBY MODE: Enables a low-power standby instead of

turning off the stereo completely. When enabled, the stereo

turns on much faster, but the stereo uses more battery when

in standby mode than when turned off (Enabling Standby

Mode, page 2).

NRX POWER: Turns on or off the power the stereo provides to

optional NRX series wired remote controls not on a NMEA

2000

network (Configuring an Optional Wired Remote,

page 11).

SYSTEM OFF: Sends a signal to turn off on all devices

connected to the network.

Network Settings

Select > SETTINGS > NETWORK.

DHCP: Sets the device as a DHCP client.

STATIC IP: Allows you to set a static IP address for the device

(Setting a Static IP Address, page 9).

DETAILS: Shows information about the network configuration.

ADVANCED: Allows you to configure the DHCP server and

reset all network settings for this stereo to the factory default

values.

SAVE: Allows you to save changes to the network settings.

Setting the Stereo as the DHCP Server

If you connected two FUSION PartyBus stereos together

directly, or connected more than two together using a network

switch or wireless access point and did not install a router, you

must configure only one FUSION PartyBus stereo to be the

DHCP server.

Select > SETTINGS > NETWORK > STATIC IP > SAVE.

You can configure the static IP (Setting a Static IP Address,

page 9).

Select > SETTINGS > NETWORK > ADVANCED >

DHCP > DHCP > SAVE.

You can configure the IP address range of the DHCP server

(DHCP Settings, page 10).

Setting a Static IP Address

If the stereo is configured as a static IP, it is automatically

assigned the IP address of 192.168.0.1. You can change this IP

address.

If the stereo is a DHCP client on the network and you do not

want the DHCP server to automatically assign an IP address to

the stereo, you can set a static IP address.

General Settings 9

Fusion Apollo MS-RA670 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-RA670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info