Bedienungsanleitung Fusion Apollo MS-RA670 (Seite 14 von 18) (Englisch)

691367

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

NOTE: Every device on the network must have a unique IP

address. If you select a static IP address that is the same as the

IP address on the network, the devices will not work properly.

Select > SETTINGS > NETWORK > STATIC IP.

Select an option:

• To set the IP address, select IP, and enter the IP address.

• To set the subnet mask, select MASK, and enter the

subnet mask.

NOTE: The subnet mask must match all other devices on

the network to work properly. A typical subnet mask is

255.255.255.0.

• To set the default gateway IP address, select GATEWAY,

and enter the gateway IP address.

NOTE: The default gateway is typically set as the IP

address of the DHCP server on the network.

Select SAVE.

DHCP Settings

Select > SETTINGS > NETWORK > ADVANCED > DHCP.

DHCP: Sets the device as the DHCP server on the network.

START IP: Sets the first IP address in the IP-address range of

the DHCP server.

END IP: Sets the final IP address in the IP-address range of the

DHCP server.

Resetting Network Settings

You can reset all network settings for this stereo to the factory

default values.

Select > SETTINGS > NETWORK > RESET > YES.

Update Options

Select > SETTINGS > UPDATE.

NOTICE

Do not turn off the stereo or disconnect the power during a

software update. Turning off the power during a software update

may cause the stereo to become unresponsive.

NOTE:

• You should update the stereo software using a USB flash

drive formatted to FAT32. If the stereo is connected to a

wireless network, you can update the software using the

FUSION-Link app on a smartphone.

• Do not remove power from the stereo during the update.

• The stereo may restart a few times during the software

update. This is normal.

• You can program only newer versions of software on the

stereo.

STEREO: Updates the stereo using a valid software update file

on a connected USB flash drive.

NRX REMOTE: Updates an optional NRX remote connected to

the NMEA 2000 port or NMEA 2000 network using a valid

software update file on a connected USB flash drive.

DAB MODULE: Updates an optional DAB module connected to

the SIRIUS XM port using a valid software update file on a

connected USB flash drive.

FACTORY RESET: Restores all settings to the factory default

values.

Additional Stereo Control Options

Connecting to a Garmin

Watch

For a list of a compatible Garmin watches, go to

www.fusionentertainment.com.

For more information about the watch, see the watch manual at

www.garmin.com/manuals.

Following the instructions in the watch manual, install the

FUSION-Link Lite

™

app from the Connect IQ

™

store onto the

watch.

On the stereo, select the BT source.

Select > DISCOVERABLE.

The stereo remains discoverable for two minutes.

Bring the watch within 3 m (10 ft.) of the stereo.

NOTE: Stay 10 m (33 ft.) away from other ANT

devices

while pairing.

Open the FUSION-Link Lite app on the watch.

The first time you open the app on the watch, the watch

automatically pairs with and connects to the stereo. If you

need to pair to another stereo, in the FUSION-Link Lite app,

select Settings > Pair new.

Control the audio playback using the FUSION-Link Lite app

on the watch.

After the devices are paired, they connect automatically when

they are turned on, within range, and the app is open on the

watch.

Connecting to an ARX70 Remote Control

On the stereo, select the BT source.

Select > DISCOVERABLE.

Bring the ARX70 remote control within 10 m (33 ft.) of the

stereo.

NOTE: Stay 10 m (33 ft.) away from other ANT devices while

pairing.

On the ARX70 remote control, press and hold until the

status LED starts alternating green and red.

The remote control searches for the stereo. When the remote

control pairs successfully, the status LED turns on green

briefly and then turns off.

If the remote control cannot find the stereo, the status LED turns

on red briefly and then turns off.

FUSION-Link Wireless Remote Control App

You can use the FUSION-Link remote control app on your

compatible Apple or Android device to adjust the stereo volume,

change the source, control playback, select and manage radio

presets, and adjust some stereo settings.You can use the app to

set up and configure DSP profiles on the stereo.

The app communicates with the stereo using a wireless

connection to the mobile device. You must connect your

compatible device to the stereo using Bluetooth or Wi‑Fi

technology to use the app.

If the stereo is connected to a network with a Wi‑Fi access point,

the app can communicate with the stereo using the network for

greater range than a Bluetooth connection.

For information about the FUSION-Link remote control app for

compatible Apple or Android devices, go to the Apple App

Store

or the Google Play

™

store.

FUSION-Link

™

Network Technology

FUSION-Link network technology allows you to fully control

compatible FUSION entertainment systems on compatible multi-

function displays installed at the helm, flybridge, or navigation

station of the vessel. This provides integrated entertainment

control and a less cluttered console.

The partnered multi-function display becomes the portal on

which you can control all audio on the vessel, no matter where

on the vessel the connected stereo is installed. The FUSION-

Link equipped stereo can be installed out of sight if space is an

10 Additional Stereo Control Options

Fusion Apollo MS-RA670 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-RA670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info