Bedienungsanleitung Futaba 6EXHP (Seite 2 von 24) (Englisch)

28987

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

INTRODUCTION

Thank you for purchasing the Futaba

6EXHP digital proportional R/C helicopter system. If this is your ﬁrst “computer” radio,

rest assured that it is designed to make initial setup and ﬁeld-tuning of your helicopter easier and more accurate than would be

if using a “non-computer” radio. Although this is a

beginner or sport system with the requirements of those ﬂyers in mind, in

order to make the best use of your Futaba 6EXHP and to operate it safely,

you must carefully read all of the instructions.

Suggestion: If, while reading the instructions, you are unclear of some of the procedures or functions and become “stuck,”

continue to read on anyway. Often, the function or procedure will be explained again later in a different way providing another

perspective from which to understand it. Another suggestion is to connect the battery, switch and servos to the receiver and

actually operate the radio on your workbench as you make programming changes. Then, you’ll be able to see the effects of

your programming inputs.

SERVICE

(in USA)

If any difﬁculties are encountered while setting up or operating your system, please consult the instruction manual ﬁrst.

For further assistance you may also refer to your hobby dealer, or contact the Futaba Service Center at the web site, fax

number or telephone number below:

www.futaba-rc.com

Fax: (217) 398-7721

Telephone (8:00 am to 5:00 pm Central time Monday through Friday): (217) 398-8970, extension 2

If unable to resolve the problem, pack the system in its original container with a note enclosed and a

thorough, accurate

description of the problem(s). Include the following in your note:

• Symptoms. • Any unusual mounting conditions.

• An inventory of items enclosed. • The items that require repair.

• Your name, address, and telephone number. • Include the warranty card if warranty service is requested.

Send your system to the authorized Futaba R/C Service Center at the address below:

Futaba Service Center

3002 N Apollo Drive Suite 1

Champaign, IL 61822

This product is to be used for sport and recreational ﬂying of radio-control models only. Futaba is not

responsible for the results of use of this product by the customer or for any alteration of this product,

including modification or incorporation into other devices by third parties. Modification will void any

warranty and is done at the owner’s risk.

(USA only)

Protect the environment by disposing of rechargeable batteries responsibly. Throwing rechargeable

batteries into the trash or municipal waste system is illegal in some areas. Call 1-800-8-BATTERY for

information about Ni-Cd battery recycling in your area.

TABLE OF CONTENTS

Introduction ..........................................................................2

Service ..................................................................................

Contents and speciﬁcations ...............................................

Introduction to the 6EXAP system .....................................

Transmitter controls and descriptions ..............................

Radio installation .................................................................

Receiver and servo connections .......................................

Charging the Ni-Cd batteries ..............................................

LCD and Programming controls ........................................

Programming the T6EHAP radio ......................................

MODL Model select function ........................................10

MODL Model select function ..................................10

REST Data reset function .......................................10

PULS Modulation select function ...........................11

Model name settings ...............................................11

REVE Servo reversing .................................................11

D/R Dual Rate and Exponential settings .................. 12

D/R Dual Rate settings ...........................................12

EXPO Exponentials ................................................12

EPA End Point Adjustments .........................................12

TRIM Trim Settings ......................................................13

N-TH Normal Throttle Curve ........................................14

N-PI Normal Pitch Curve ..............................................14

I-TH Idle-Up Throttle Curve function ............................14

I-PI Idle-Up Pitch Curve function .................................15

HOLD Throttle hold function ........................................15

REVO Pitch - rudder mixing function ...........................16

GYRO Gyro mixing function .........................................16

SWSH Swashplate types selection & Swash AFR ......17

FS Fail safe (PCM mode only) .....................................19

Flow chart .....................................................................20

OtherT6EXHP functions ....................................................21

Trainer function .............................................................21

Adjustable-length control sticks ...................................21

Changing the stick mode ..............................................22

Flying safety guidelines ....................................................22

Flight preparation ..............................................................23

Model Data Recording Sheets ..........................................24

Futaba 6EXHP Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info