30098
22
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
J Channel select switch
•This
switch
selects
the channel
to
be
set
by
ATV
or
FS, when used in conjunction with item [1] ATV/FS
button previously described. It is also the select
switch for servo test and the switch which selects the
channel to be by switch [35] RESET.
[34] Channel select switch
Fig.
53
Relationship among channel select switch number,
servo and reset.
No.
1
2
3
4
5
6
7
8
RESET &
TEST ALL
OFF
At
switch [35]
FS
SELECT,
ATV, TEST A.B
Aileron
Elevator
Throttle
Rudder
Channel 5 switch
Channel 6 pitch
Channel 7 knob
Channel 8 switch
All the servos are
operated at servo
test.
Usually set to this OFF position.
At switch [35]
RESET
FS (fail safe)
ATV
BFS memory
FS,
ATV,
and BFS
memory are reset
simultaneously.
K Function select switch
•This
switch
selects
ATV,
FS,
servo
test,
reset,
and
BFS memory setting as described at [I] ATV/FS
button.
Normally set it to OFF.
1
FS
ALL
Switch to this position when setting fail safe for all
channels, FS is described in the "HOW TO USE
FS" section.
2 FS
SELECT
This position allows setting of fail safe and hold as
described in the "HOW TO USE FS" section.
3
ATV
This position allows setting ATV as described in
the "HOW TO USE ATV" section.
4 TEST A
This position allows servo
test A as described in the
"SERVO TEST" section.
5 TEST B
This position allows servo test B as described in the
"SERVO TEST" section.
6 BFS MEMO SET
Switch to this position when setting the BFS re-
lease
point
as
described in the "BATTERY
FS
MEMORY SETTING" section.
7
OFF
Normally
set to this position.
35 Function select switch
Fig.
54
20
39 Trainer cord socket
40 Trainer switch
Push on/self-off switch. The transmitter connected
by the trainer cord (M-TC) operates and when it is
OFF, your-own transmitter only operates.
Connect the transmitters with the trainer cord (M-
TC-FM, purchased separately) as shown in Fig. 55.
When the switch is in the ON (push) position, the
student's transmitter operates and when the switch
is in the OFF position, the instructor's transmitter
Operates. The transmitter at which the trainer
switch is operated on-off becomes the instructor's.
Instructor transmitter
(Power switch ON and transmitter operating)
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Futaba FP8SSHP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info