Bedienungsanleitung Gaggenau CV282 (Seite 20 von 52) (Englisch)

702999

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

en Flex function

Flex function

The flexible cooking zone can be used as a single

hotplate or as two independent hotplates, as required.

It consists of four inductors that work independently of

each other. If the flex function is in use, only the area

that is covered by cookware is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is

distributed evenly, correctly centre the cookware:

As two independent hotplates

The flexible cooking zone is used like two independent

hotplates.

Activating

See the section entitled ~ "Operating the appliance"

on page 15

As a single hotplate

Using the entire cooking zone by connecting both

hotplates.

Linking the two hotplates

1 Set down the cookware. Select one of the two

hotplates in the flexible cooking zone and set the

heat setting.

2 Touch the ª symbol. The ª indicator lights up next

to the cooging zone display.

The flexible cooking zone has now been activated. The

heat setting appears in the two displays for the flexible

cooking zone.

Notes

– If both hotplates are set to different heat settings

before being linked, switch both hotplates to 0on

activation.

– If there is a cooking timer programmed for one

hotplate, this will also be assigned to the second

hotplate when the two are linked.

Changing the heat setting

Select one of the two hotplates assigned to the flexible

cooking zone and set the heat setting using the twist

knob.

Adding new cookware

1 Set down additional cookware in the appropriate

position according to size.

If correctly positioned, cookware is detected and

the hotplate is selected automatically; the

corresponding part of the display ª flashes.

2 Use the twist knob to confirm the setting within

90 seconds. The indicators stop flashing and the

cookware is heated up.

Note: If the indicators continue to flash, check

whether the cookware is suitable for induction

cooking

Note: If the cookware is moved to the hotplate being

used or lifted up, the hotplate begins an automatic

search and the heat setting selected previously is

retained.

Unlinking the two hotplates

1 Select one of the two hotplates assigned to the

flexible cooking zone.

2 Touch the ª symbol.

3 The « symbol appears in the cooking zone display.

This deactivates the flexible cooking zone. The two

hotplates will now function independently.

Note: If the hob is switched off, and then switched back

on again later, the flexible cooking zone is reset to

function as two independent hotplates.

As a single hotplate

Diameter smaller than or equal to

13cm

Place the cookware on one of the four

positions that can be seen in the illus-

tration.

Diameter greater than 13cm

Place the cookware on one of the

three positions that can be seen in the

illustration.

If the cookware takes up more than

one hotplate, place it starting on the

upper or lower edge of the flexible

cooking zone.

As two independent hotplates

The front and rear hotplates each have two

inductors and can be used independently of

each other. Select the required heat setting

for each of the hotplates. Use only one item

of cookware on each hotplate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CV282 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CV282

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info