Bedienungsanleitung Gaggenau CV282 (Seite 29 von 52) (Englisch)

702999

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Automatic functions

Temperature ranges

Tips for cooking with the cooking sensor function

▯ Heating up/keeping warm: Portioned frozen

products, e.g. spinach. Place the frozen product in

the cookware. Add the volume of water specified by

the manufacturer. Cover the cookware and set the

temperature to 70 °C. Stir during cooking.

▯ Cooking: Thicken foods, e.g. sauces. Bring the food

to the boil at the recommended temperature. Once

the food has thickened, simmer at 85 °C.

After the audible signal sounds, keep the food at

this temperature for the required time.

▯ Boiling: Heat up water with the lid on. It will not boil

over. Set the temperature to 100°C.

▯ Cooking in a pressure cooker: Follow the

manufacturer's recommendations. Continue

cooking for the recommended time once the

audible signal has sounded. Set the temperature to

115°C.

▯ Frying with a large amount of oil in the saucepan:

Heat the oil with the lid on. Once the audible signal

has sounded, remove the lid and add the food. Set

the temperature to 175°C.

Notes

– Before you cook anything, make sure that the

silicone patch is completely dry.

– Always cook with the lid on. Exception: "Frying with

a large amount of oil in the saucepan", temperature

170°C.

– If an audible signal does not sound, make sure that

the lid is on the saucepan.

– Never leave oil unattended when it is being heated.

Use oil or fat that is suitable for frying.Do not mix

different cooking fats together, e.g. oil and lard.

Mixtures of different fats may froth up when hot.

– If you are not satisfied with the cooking result, e.g.

when cooking potatoes, next time use more water

but keep the recommended temperature setting.

Setting the boiling point

The point at which water starts to boil depends on the

height of your home above sea level. You can change

the boiling point if water is boiling too strongly or not

strongly enough. To do this, proceed as follows:

▯ Select the basic setting ™†; see the section

entitled

▯ The basic setting is set to 3by default. If your home

is between 200and 400metres above sea level,

there is no need to change the boiling point. If not,

choose the correct setting from the following table

according to your altitude:

Note: The 100°C temperature setting provides

efficient cooking even if the water does not bubble very

strongly during the heating process. If you are not

satisfied with the boiling result, however, you can

change the boiling point setting.

Connecting the wireless temperature sensor to the

control panel

You will need to connect the wireless temperature

sensor to the control panel before using the cooking

sensor functions for the first time.

To connect the wireless temperature sensor to the

control panel, follow the instructions below:

1 Call up the basic setting ™†; see the section

entitled ~ "Basic settings"

The ¨ symbol will light up white.

2 Press the ¨ symbol. A signal will sound and the ¨

symbol will light up orange. The hotplate indicators

will light up white and the cooking sensor indicators

on the hotplates will flash.

Briefly press the ¨ symbol on the wireless

temperature sensor within 30seconds.

3 Detection successful: The wireless temperature

sensor is detected in a few seconds. Three short

beeps will sound and the ¨ symbol will change

from orange to white. The cooking sensor

indicators on the hotplates will go out.

Detection failed: Five beeps will sound. The ¨

symbol will immediately change from orange to

white and the cooking sensor indicators on the

hotplates will go out.

Cooking sensor func-

tion

Temperature

range

Suitable for

Heating, Keepting

warm

60- 70 °C e.g. soups, punch

Simmering 80- 90 °C e.g. rice, milk

Boiling 90- 100 °C e.g. pasta, vegeta-

bles

Cooking in a pressure

cooker

110- 120 °C e.g. chicken, stew

Frying with a large

amount of oil in the

saucepan

170- 180 °C e.g. doughnuts,

meatballs

Altitude

Setting

™†

0- 100m.

‚

100- 200m.

200- 400m.

„*

400- 600m.

…

600- 800m.

†

800- 1000m.

‡

1000- 1200m.

1200- 1400m.

‰

Over 1400m.

* Basic setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CV282 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CV282

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info