Bedienungsanleitung Gardenline KSI-2200 (Seite 6 von 16) (Englisch)

724682

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

AFTER SALES SUPPORT

Tel.: 1800 909 909

www.globalpowerbrands.com email: help@globalpowerbrands.com

KSI 2200

AUS

earthing contact and tested electrical installations. We recom-

mend the use of a residual-current-operated circuit-breaker. The

fuse must have a value of 16 A and mustn’t be used by other

consumers while working with the chainsaw.

15. The cable must be winded o completely when you use a cable

drum.

16. Ensure that the power cable has no kinks and is not damaged.

17. The chainsaw may only be used in a completely assembled state.

No protective devices may be missing.

18. Switch the chainsaw o immediately if you notice any changes in

the machine.

19. Always have a  rst-aid kit at hand in case of accidents.

20. If the chainsaw comes into contact with earth, stones, nails or

other foreign objects, withdraw the plug immediately and check

the chain as well as the bar.

21. Ensure that no chain oil penetrates into the earth or sewage.

Always place the chainsaw on something that will absorb any oil

dripping from the bar or chain.

22. Avoid to use the chainsaw in poor weather conditions, especially

if there is a risk of a thunderstorm.

C) Warning to the danger of recoil (“kickback”)

23. If possible, use a stand.

24. Always keep an eye on the bar tip.

25. Only place a running saw on the object to be cut. Never start the

machine while the chain rests on something.

26. So called piercing cuts with the bar tip may only be carried out by

trained personnel.

D) Instructions on safe working techniques

27. Working on ladders, sca oldings or trees is forbidden.

28. Ensure that the wood cannot twist while it is being cut.

29. Watch out for splintering wood. While you are sawing you may be

injured by  ying wood chips.

30. Do not use the chainsaw to lever or move the wood.

31. Only cut with the lower section of the saw. The saw will be re-

pulsed towards you if you try and cut with the upper section of

the saw.

32. Ensure that the wood is free of stones, nails or other foreign ob-

jects.

33. We recommend that  rst-time users are instructed practically as to

the correct use of the chainsaw and the required personal safety

equipment by an experienced operator; the cutting of round wood

or logs should be trained on a log stand or similar rack-type device

 rst.

34. Keep the running chainsaw from touching the ground or wire

fences.

1 Oil inspection window (see Fig. 2)

2 Front handle

3 Oil tank cap

4 Front hand protection

5 Blade

6 Saw chain

3. Names of parts

7 T-screw

8 Pinion lid

9 Switch

10 Rear hand protection

11 Rear handle

12 Mains connection with plug

13 Blade protection

14 Fell handle for horizontal cut

15 Stopping button (see Fig. 6 / 15)

16 Knurling wheel for quick chain tension adjustment

17 Cable support

18 Chain drive wheel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gardenline KSI-2200 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info