Bedienungsanleitung Garmin BC 40 (Seite 10 von 14) (Englisch)

691049

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Specifications

Battery Type 2 removable 1.5 V AA. Lithium

recommended.

Camera and transmitter

water rating

IEC 60529 IPX7

Operating temperature

range

From -20° to 70°C (from -4° to 158°F)

Wireless frequencies/

protocols

Wi‑Fi 2.4 GHz @ +13dBm nominal

Bluetooth

2.4 GHz

Troubleshooting

The camera takes a long time to connect or

does not connect

Your camera may have a weak wireless connection to your

navigation device if it takes a long time to display video on the

navigation device, if the video frequently pauses or buffers, or if

the camera does not display video at all on your navigation

device. Interference with the connection can be caused by other

wireless signals, vehicle wiring, or structural elements of your

vehicle.

You can try these options to help improve the stability of the

wireless connection between your camera and your navigation

device.

• Move the navigation device to a different location on your

dash or windshield.

• Remove the camera from the mount, flip it upside down, and

place it back into the mount.

When mounted with the Garmin logo upside-down, the

camera automatically flips the video the next time it connects

to your navigation device to provide a correctly oriented

image. Flipping the camera upside down changes the

position of the wireless antenna and can improve the

connection quality in some cases.

• Mount the camera at a different location on your license

plate.

For example, if your camera is mounted at the top of your

license plate, you can try moving it to the bottom of the

license plate, or vice-versa.

• Try one or more of these options to reduce sources of Wi‑Fi

interference:

◦ Set the wireless router in your home to use a channel

other than channel 11.

The camera communicates with your navigation device

using a 2.4 GHz Wi‑Fi signal on channel 11. Reducing the

number of nearby devices using the same channel can

improve the wireless connection.

◦ Turn off the Wi‑Fi radio on other devices in your car, such

as your smartphone or mobile Wi‑Fi hotspot.

The camera does not work well in cold

weather

If you experience problems with the wireless camera connection

or video stability in cold weather, you should verify you are using

lithium AA batteries in the device. Alkaline and NiMH batteries

lose power quickly at low temperatures, and even brand-new

Alkaline or NiMH batteries may not function at all in extremely

cold environments. Lithium AA batteries provide longer battery

life and more consistent power, especially in cold environments.

Appendix

Camper Mount Installation Considerations

NOTICE

Garmin strongly recommends having an experienced installer

with the proper knowledge of camper installations and

waterproofing install the mount. Incorrectly installing the mount

can result in damage to the vehicle or the camera.

Failure to heed the installation considerations could result in

damage to the camera or the vehicle. Garmin is not responsible

for any damage caused to the camera or vehicle during

installation or as a result of the camera mount detaching from

the vehicle.

You can use the optional camper mount accessory to install the

camera on your camper in an area other than the license plate.

When selecting a mounting location and installing the camper

mount, observe these considerations.

• You must choose a suitable mounting location for the camera

before drilling holes in the vehicle. You should verify the

camera view from the mounting location provides the desired

visibility. You must also verify the mounting surface allows

the mount to be securely connected and the mounting screws

will not interfere with interior wiring or camper features.

• You must use proper mounting screws for your vehicle's

external mounting surface. The included mounting screws

are intended for installation only on campers with a fiberglass

exterior, and they should not be used for campers with an

aluminum exterior, or any other material. Before installing the

screws, you must verify the screws are the correct length and

will not damage any interior components.

• You must fully seal the screws, holes, and mount with

outdoor waterproofing sealant to prevent water from entering

the vehicle or the vehicle shell.

Installing the Camper Mount on Your Vehicle

NOTICE

Garmin strongly recommends having an experienced installer

with the proper knowledge of camper installations and

waterproofing install the mount. Incorrectly installing the mount

can result in damage to the vehicle or the camera.

Failure to heed the installation considerations could result in

damage to the camera or the vehicle. Garmin is not responsible

for any damage caused to the camera or vehicle during

installation or as a result of the camera mount detaching from

the vehicle.

To install the mount, you need a drill with a 3.2 mm (1/8 in.) drill

bit, a pencil, a Philips screwdriver, outdoor waterproofing

sealant, and two M4 screws (included for some vehicles).

Place the mount base against the mounting surface in the

location where you want to mount the camera, and mark the

location of the two mounting holes using a pencil or other

writing instrument.

You should ensure the mount is level and correctly

positioned.

6 Troubleshooting

Garmin BC 40 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin BC 40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info