Bedienungsanleitung Garmin BC 40 (Seite 9 von 14) (Englisch)

691049

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

default camera and appears first each time the camera view

appears.

Unpair: Removes the paired camera.

Automatic Activation: Enables the Garmin navigation device to

display the default camera view automatically each time the

navigation device is turned on. If the navigation device is

connected to an ignition-switched power outlet, this feature

allows you to view the backup camera automatically when

you start your vehicle.

Video Resolution: Allows you to set the quality of the camera

video. Higher resolution settings provide a more detailed

image but use more battery power.

NOTE: This setting is not available for all navigation device

product models.

Aligning the Guidance Lines

For the best reference, the guidance lines should be aligned to

reflect the outside edges of the vehicle. You should align the

guidance lines separately for each backup camera. When you

change the camera angle, you should immediately align the

guidance lines again.

Position your vehicle with the driver's side closely aligned to a

curb, driveway, or parking stall lines.

TIP: It can be helpful to position the vehicle in the center of a

parking stall, and then pull forward into the next stall. This

allows you to use the parking stall lines at the rear of the

vehicle as reference points for alignment.

From the paired Garmin navigation device, select Settings >

Wireless Camera.

Select the paired camera name, and select Guidance Lines

> Adjust Guidance Lines.

Use the arrows in the corners of the screen to move the ends

of the white, driver's-side guidance line.

The guidance line should appear directly on top of the curb,

driveway, or parking stall line.

Use the arrows in the center of the screen to move the

colored distance guidance lines up or down.

The red guidance line should be aligned with the rearmost

part of your vehicle. This could be the rear bumper, a trailer

hitch, or another object protruding from the rear of the

vehicle.

Reposition the vehicle with the passenger side closely

aligned to a curb, driveway, or parking stall lines, and use the

arrows to align the white, passenger-side guidance line.

The guidance lines should be symmetrical.

Changing the Camera Order

You can change the order in which cameras appear when you

switch cameras.

Select Settings > Wireless Camera.

Select a camera.

Select Set Default Camera.

A list of paired cameras appears.

Drag each camera to the desired location in the list.

When you switch cameras from the camera view, the

cameras appear in the listed order, from top to bottom. The

camera at the top of the list is the default camera and

appears first each time the camera view appears.

Renaming a Camera

You can change the name that appears above a camera in the

camera view. You should use a descriptive name that clearly

identifies the location of the camera.

Select Settings > Wireless Camera.

Select a camera.

Select Rename.

Removing a Paired Camera

You can pair up to 4 wireless cameras with a compatible Garmin

navigation device. If you have already paired the maximum

number of cameras, you must unpair one before you can pair

another one.

From a paired Garmin navigation device, select Settings >

Wireless Camera.

Select a camera.

Select Unpair.

Device Information

Software Updates

Software updates for your camera are received automatically

from the paired Garmin navigation device. You should update

your Garmin navigation device software regularly to keep both it

and the camera up to date. For more information about updating

software, see the owner's manual for your Garmin navigator.

Updating the Camera Software

Before you can update the camera software, you must pair the

camera with a compatible Garmin navigation device (Pairing the

Camera with a Garmin Navigation Device, page 3).

On the paired Garmin navigation device, select an option:

• Connect to a Wi‑Fi

network, and select Settings >

Updates > Install All.

• Install all available updates using the Garmin Express

™

application.

See the owner's manual for your Garmin navigation device

for more information.

The navigation device downloads updates for itself and updates

for your BC 40 camera, if available. The next time the device

connects to your camera, it sends the update to the camera

automatically. A message and progress indicator appear on the

navigation device screen while the camera is updating. It takes

about one minute to install the camera update.

Checking the Camera Software Version

Before you can check the camera software version, you must

pair the camera with a compatible Garmin navigation device

(Pairing the Camera with a Garmin Navigation Device, page 3).

On the paired Garmin navigation device, select Settings >

Device > About.

The device displays version information for all software on

the device.

Locate the camera name in the list.

The software version number appears next to the camera

name.

Device Information 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin BC 40 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin BC 40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info