Bedienungsanleitung Garmin D2 Pilot (Seite 16 von 24) (Englisch)

563575

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

• Select Setup > Units to change units of measurement.

For example, you can record your biking distance in

kilometers instead of miles.

• Customize the hold function of your arrow keys for your

activity (Customizing the Arrow Keys).

• Select Setup > Fitness > Auto Lap to set your lap distance.

The default distance is 1 mi (1.60 km).

• Enter your fitness user profile information (Setting Your

Fitness User Profile) and heart rate zones (Setting Your

Heart Rate Zones) to obtain accurate calorie measurements.

Going for a Run

Before you go for a run, you must change the profile to running

(Changing Profiles).

1Select the action key.

2Select Start GPS.

3Wait while the device locates satellites.

4Hold to start the timer.

5Start running.

You can hold to pause and resume your run. You can hold

to mark a lap.

6Select the action key.

7Select Stop GPS to finish your run.

The device automatically saves your run.

History

History includes date, time, distance, calories, average speed or

pace, ascent, descent, and optional ANT+™ sensor information.

NOTE: History is not recorded while the timer is stopped or

paused.

When the device memory is full, a message appears. The

device does not automatically delete or overwrite your history.

You can upload your history to Garmin Connect (Using Garmin

Connect) or BaseCamp (Garmin Adventures) periodically to

keep track of all your activity data.

Viewing an Activity

You can view the history or a map of your fitness activity.

1Select the action key.

2Select FIT History.

A list of your activities appears by date.

3Select an activity.

4Select Details or View Map.

Saving an Activity as a Track

You can save an activity as a track using GPS. This allows you

to perform GPS functions with the activity, such as navigation

and routes.

1Select the action key.

2Select FIT History.

3Select an activity.

4Select Save as Track.

Deleting an Activity

1Select the action key.

2Select FIT History.

3Select an activity.

4Select Delete > Yes.

Using Garmin Connect

1Connect the device to your computer using the USB cable.

2Go to www.garminconnect.com/start.

3Follow the on-screen instructions.

ANT+ Sensors

The device is compatible with these optional, wireless ANT+

accessories.

• Heart rate monitor (Putting On the Heart Rate Monitor)

• GSC™ 10 speed and cadence sensor (Using an Optional

Bike Cadence Sensor)

• tempe wireless temperature sensor (tempe)

For information about compatibility and purchasing additional

sensors, go to http://buy.garmin.com.

Pairing Your ANT+ Sensors

Before you can pair, you must put on the heart rate monitor or

install the sensor.

Pairing is the connecting of ANT+ wireless sensors, for

example, connecting a heart rate monitor with your Garmin

device.

1Bring the device with range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

2Select the action key.

3Select Setup > ANT Sensor.

4Select your sensor.

5Select New Search.

When the sensor is paired with your device, the sensor

status changes from Searching to Connected. Sensor data

appears in the data page loop or a custom data field.

tempe

The tempe is an ANT+ wireless temperature sensor. You can

attach the sensor to a secure strap or loop where it is exposed

to ambient air, and therefore, provides a consistent source of

accurate temperature data. You must pair the tempe with your

device to display temperature data from the tempe.

Putting On the Heart Rate Monitor

NOTE: If you do not have a heart rate monitor, you can skip this

task.

You should wear the heart rate monitor directly on your skin,

just below your breastplate. It should be snug enough to stay in

place during your activity.

1Snap the heart rate monitor module À onto the strap.

2Wet both electrodes Á on the back of the strap to create a

strong connection between your chest and the transmitter.

3If the heart rate monitor has a contact patch Â, wet the

contact patch.

12 ANT+ Sensors

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin D2 Pilot Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin D2 Pilot

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info