Bedienungsanleitung Garmin D2 Pilot (Seite 18 von 24) (Englisch)

563575

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Setting the Foot Pod Mode

You can set your device to use foot pod data instead of GPS

data to calculate pace.

1Select the action key.

2Select Setup > Fitness > Foot Pod Speed.

3Select an option:

• Select Indoor when you are training indoors without GPS.

• Select Always On when training outdoors, when your

GPS signal is weak, or when you lose satellite signals.

Going for a Run Using a Foot Pod

Before you go for a run, you must change the profile to running

(Changing Profiles), and pair the foot pod with your device

(Pairing Your ANT+ Sensors).

When your device can not acquire satellite signals, such as

when running indoors on a treadmill, you can use the foot pod

to measure your running distance.

1Install your foot pod according to the accessory instructions.

2Select the action key.

3Select Setup > Fitness > Foot Pod Speed > Indoor.

4Hold to start the timer.

5Start running.

You can hold to pause and resume your run. You can hold

to mark a lap.

6Hold to stop the timer.

The device automatically saves your run.

Foot Pod Calibration

Calibrating your foot pod is optional and can improve accuracy.

There are three ways to adjust the calibration: distance, GPS,

and manual.

Calibrating Your Foot Pod by Distance

Before you can calibrate your device, you must pair your device

with the foot pod (Pairing Your ANT+ Sensors).

For best results, the foot pod should be calibrated using the

inside lane of a regulation track or an exact distance. A

regulation track (2 laps = 0.5 mi. or 800 m) is more accurate

than a treadmill.

1Select the action key.

2Select Setup > ANT Sensor > Foot Pod > Calibrate >

Distance.

3Select Start to begin recording.

4Run or walk 0.5 mi. or 800 m.

5Select Stop.

Calibrating Your Foot Pod by GPS

Before you can calibrate your device, you must acquire GPS

signals, and pair your device with the foot pod (Pairing Your

ANT+ Sensors).

1Select the action key.

2Select Setup > ANT Sensor > Foot Pod > Calibrate >

GPS.

3Select Start to begin recording.

4Run or walk approximately 0.62 mi. or 1 k.

The device informs you when you have traveled far enough.

Calibrating Your Foot Pod Manually

Before you can calibrate your device, you must pair your device

with the foot pod (Pairing Your ANT+ Sensors).

Garmin recommends manual calibration if you know your

calibration factor. If you have calibrated a foot pod with another

Garmin product, you may know your calibration factor.

1Select the action key.

2Select Setup > ANT Sensor > Foot Pod > Calibrate >

Manual.

3Adjust the calibration factor:

• Increase the calibration factor if your distance is too low.

• Decrease the calibration factor if your distance is too high.

Using an Optional Bike Cadence Sensor

You can use a compatible bike cadence sensor to send data to

your device.

• Pair the sensor with your device (Pairing Your ANT+

Sensors).

• Create a custom profile for biking (Creating a Custom

Profile).

• Update your fitness user profile information (Setting Your

Fitness User Profile).

Device Information

Viewing Device Information

You can view the unit ID, software version, and license

agreement.

1Select the action key.

2Select Setup > About.

Updating the Aviation Database

Before you can update the aviation database, you must create a

Garmin account and add your device.

The aviation database is valid for 6 months at a time and

includes only airport locations and basemap.

1Connect your device to a computer using the included USB

cable.

2Go to www.flyGarmin.com.

3Log in to your Garmin account.

4Follow the on-screen instructions to update the aviation

database.

Updating the Software

NOTE: Updating the software does not erase any of your data

or settings.

1Connect your device to a computer using the USB cable.

2Go to www.garmin.com/products/webupdater.

3Follow the on-screen instructions.

Device Care

NOTICE

Do not use a sharp object to clean the device.

Avoid chemical cleaners, solvents, and insect repellents that

can damage plastic components and finishes.

Thoroughly rinse the device with fresh water after exposure to

chlorine, salt water, sunscreen, cosmetics, alcohol, or other

harsh chemicals. Prolonged exposure to these substances can

damage the case.

Avoid pressing the keys under water.

Avoid extreme shock and harsh treatment, because it can

degrade the life of the product.

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

14 Device Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin D2 Pilot Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin D2 Pilot

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info