Bedienungsanleitung Garmin EDGE 130 PLUS (Seite 7 von 22) (Englisch)

725379

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

If necessary, use the 2 mm hex key to remove the two

screws on the back side of the mount , remove and rotate

the connector, and replace the screws to change the

orientation of the mount.

Replace and tighten the screw on the handlebar connector.

NOTE: Garmin recommends tightening the screw so the

mount is secure, with a maximum torque specification of

7 lbf-in. (0.8 N-m). You should check the tightness of the

screw periodically.

Align the tabs on the back of the Edge device with the bike

mount notches .

Press down slightly and turn the Edge device clockwise until

it locks into place.

Acquiring Satellite Signals

The device may need a clear view of the sky to acquire satellite

signals. The time and date are set automatically based on the

GPS position.

TIP: For more information about GPS, go to www.garmin.com

/aboutGPS.

Go outdoors to an open area.

The front of the device should be oriented toward the sky.

Wait while the device locates satellites.

It may take 30–60 seconds to locate satellite signals.

Training

Going for a Ride

If your device was packaged with an ANT+

sensor, they are

already paired and can be activated during initial setup.

Hold to turn on the device.

Go outside, and wait while the device locates satellites.

appears solid when the device is ready.

From the home screen, select .

Select the ride type.

TIP: Accurate ride type data is important for creating bike

friendly courses on your Garmin Connect account.

Select to start the activity timer.

NOTE: History is recorded only while the activity timer is

running.

Select to stop the activity timer.

Select an option:

• Select Resume to resume your ride.

• Select Save Ride to stop your ride and save it.

• Select Discard Ride to stop your ride and delete it from

your device.

• Select Back to Start to navigate back to your starting

location.

• Select Mark Location to mark your location and save it.

• Select Main Menu to return to the main menu.

Following a Saved Ride

Hold .

Select Navigation > Ride an Activity.

Select a ride.

TIP: You can select to view more detailed information

about your ride, such as a summary, map location, lap

details, or to delete this ride.

Select Ride.

Select to start the activity timer.

Segments

Following a segment: You can send segments from your

Garmin Connect account to your device. After a segment is

saved to your device, you can follow the segment.

NOTE: When you download a course from your Garmin

Connect account, all segments in the course are downloaded

automatically.

Racing a segment: You can race a segment, trying to match or

exceed your personal record or other cyclists who have

ridden the segment.

Strava

™

Segments

You can download Strava segments to your Edge 130 Plus

device. Follow Strava segments to compare your performance

with your past rides, friends, and pros who have ridden the

same segment.

To sign up for a Strava membership, go to the segments widget

in your Garmin Connect account. For more information, go to

www.strava.com.

The information in this manual applies to both Garmin Connect

segments and Strava segments.

Following a Segment From Garmin Connect

Before you can download and follow a segment from Garmin

Connect, you must have a Garmin Connect account (Garmin

Connect, page 10).

NOTE: If you are using Strava segments, your favorite

segments are transferred automatically to your device when it is

connected to the Garmin Connect app or your computer.

Select an option:

• Open the Garmin Connect app.

• Go to connect.garmin.com.

Create a new segment, or select an existing segment.

Select or Send to Device.

Follow the on-screen instructions.

On the Edge device, select to start the activity timer, and

go for a ride.

When your path crosses an enabled segment, you can race

the segment.

Training 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin EDGE 130 PLUS Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin EDGE 130 PLUS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info