Bedienungsanleitung Garmin Tactix (Seite 17 von 24) (Englisch)

589618

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

regulation track (2 laps = 0.5 mi. or 800 m) is more accurate

than a treadmill.

Select the action key.

Select Setup > ANT Sensor > Foot Pod > Calibrate >

Distance.

Select Start to begin recording.

Run or walk 0.5 mi. or 800 m.

Select Stop.

Calibrating Your Foot Pod by GPS

Before you can calibrate your device, you must acquire GPS

signals, and pair your device with the foot pod (page 11).

Select the action key.

Select Setup > ANT Sensor > Foot Pod > Calibrate >

GPS.

Select Start to begin recording.

Run or walk approximately 0.62 mi. or 1 k.

The device informs you when you have traveled far enough.

Calibrating Your Foot Pod Manually

Before you can calibrate your device, you must pair your device

with the foot pod (page 11).

Garmin recommends manual calibration if you know your

calibration factor. If you have calibrated a foot pod with another

Garmin product, you may know your calibration factor.

Select the action key.

Select Setup > ANT Sensor > Foot Pod > Calibrate >

Manual.

Adjust the calibration factor:

• Increase the calibration factor if your distance is too low.

• Decrease the calibration factor if your distance is too high.

Using an Optional Bike Cadence Sensor

You can use a compatible bike cadence sensor to send data to

your device.

• Pair the sensor with your device (page 11).

• Create a custom profile for biking (page 2).

• Update your fitness user profile information (page 10).

Device Information

Viewing Device Information

You can view the unit ID, software version, and license

agreement.

Select the action key.

Select Setup > About.

Updating the Software

NOTE: Updating the software does not erase any of your data

or settings.

Connect your device to a computer using the USB cable.

Go to www.garmin.com/products/webupdater.

Follow the on-screen instructions.

Device Care

NOTICE

Do not use a sharp object to clean the device.

Avoid chemical cleaners, solvents, and insect repellents that

can damage plastic components and finishes.

Thoroughly rinse the device with fresh water after exposure to

chlorine, salt water, sunscreen, cosmetics, alcohol, or other

harsh chemicals. Prolonged exposure to these substances can

damage the case.

Avoid pressing the keys under water.

Avoid extreme shock and harsh treatment, because it can

degrade the life of the product.

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Cleaning the Device

Wipe the device using a cloth dampened with a mild

detergent solution.

Wipe it dry.

Specifications

Battery type 500 mAh Lithium-ion battery

Battery life Up to 5 weeks

Water resistance Water resistant to 164 ft. (50 m)

NOTE: The watch is designed for surface

swimming.

Operating temperature

range

From -4º to 122ºF (from -20º to 50ºC)

Radio frequency/

protocol

2.4 GHz ANT+ wireless communications

protocol

Bluetooth

Smart device

Heart Rate Monitor Specifications

Battery type User-replaceable CR2032, 3 volts

Battery life Up to 4.5 years (1 hour per day)

Water resistance Water resistant to 98.4 ft. (30 m)

NOTE: This product does not transmit heart rate

data while swimming.

Operating

temperature range

From 23° to 122°F (from -5° to 50°C)

Radio frequency/

protocol

2.4 GHz ANT+ wireless communications

protocol

Battery Information

The actual battery life depends on how much you use GPS,

device sensors, optional wireless sensors, and the backlight.

Battery Life Mode

16 hours Normal GPS mode

50 hours UltraTrac GPS mode

Up to 2 weeks Always On sensor mode

Up to 5 weeks Watch mode

Heart Rate Monitor Battery

WARNING

Do not use a sharp object to remove user-replaceable batteries.

Contact your local waste disposal department to properly

recycle the batteries. Perchlorate Material – special handling

may apply. Go to www.dtsc.ca.gov/hazardouswaste

/perchlorate.

Replacing the Heart Rate Monitor Battery

Use a small Phillips screwdriver to remove the four screws

on the back of the module.

Remove the cover and battery.

Device Information 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Tactix Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Tactix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info